Seven major precautions for the use of steel bending machine Seven major precautions for the use of steel bending machine:
1. Before using the steel bar bending machine, the steel bar bending machine should be inspected thoroughly and the no-load test run should be carried out.
2. The fuselage of the steel bar bending machine should be grounded. The power supply is not allowed to be directly connected to the button. The switch box should be installed separately.
3. It is not allowed to change the central axis, forming shaft or iron retaining shaft of the steel bending machine during operation. It is strictly forbidden to add or wipe the machine during operation.
4. The placement of the steel bars should be matched with the direction of the iron retaining shaft and the working disk, and do not reverse.
5, not straight steel bars, it is forbidden to bend on the bending machine to prevent accidents.
6. When bending steel bars, it is strictly forbidden to exceed the steel bar diameter, number of roots and mechanical speed specified by the steel bar bending machine.
7. It is strictly forbidden to stand in the working radius of the bent steel bar and on the side where the fuselage does not have a fixed pin. The bent semi-finished products should be stacked neatly and the curved structure must not face upwards.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Digital Display Hydraulic Universal Testing Machine
Pollution Testing Machine,Digital Display Pollution Testing Machine,Iron-Tower Testing Machine,Digital Display Testing Machine
Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com