The larger the width of the sliding door of the wardrobe, the larger the size of the wardrobe, the larger the space that can be opened, and the greater the visual effect. According to different sliding door materials, there are different size standards.
Glass Wardrobe Door: The recommended width of a single sliding door is not more than 950mm and the height is within 2400mm.
Panel wardrobe door: The recommended width of a single sliding door should not exceed 1200MM, and the height should be within 2400MM. Note that the door core panel may be deformed.
After considering the size of the sliding door, it is also necessary to consider the structure of the interior of your wardrobe and the division of functions. The wardrobe that is made out of this is perfect from appearance to use.
(1) The depth of the overall wardrobe is generally 55-60 cm;
If the space is not particularly stressful, I suggest that the depth of 60 cm is better, and the charges for the 55 and 60 cm manufacturers are the same, but the feeling of hanging clothes is different.
(2) The width of the flat door is between 45 and 60 cm, and the width of the sliding door is between 60 and 80 cm. The pressure of the hinge is not as good as that of the track, so the door is opened. The door panel should not be too wide or too heavy.
(3) The height of the hanging coat is sufficient to be 140 cm;
Through the practice of my family, the longest hanging gown is not as high as 140 cm, the long down jacket is 130 cm, and the suit is 120 cm long after being stored and bagged. In the previous design version, this height should be between 140 and 160 cm. I think it would be better to do just the right thing. Unlike the storage space, it is a waste to leave more space.
(4) The height of the hanging top is between 85 and 95 cm;
The height of my home is 90 cm, and the space is fully utilized. If you want to be a little looser, it will be almost at most 95 centimeters.
(5) The height of the hanging pants is between 80 and 90 cm;
The height of my house is 80 cm, and all the trousers are folded and hung up, no problem. I have to say a few words here. I always wanted to install a pants rack in the space where my pants were hung. Later, I listened to the suggestions of others and dispelled this idea. Because the pants rack can also hang seven or eight pants, it is beautiful but the space is utilized. Insufficient, the most practical way is to use a clothes rail, and then use a hanger to hang pants. Now I have more than a dozen trousers in my overall wardrobe, and there is plenty of space on both sides. It feels very good.
(6) The height of the quilt is relatively flexible, about 30 cm is enough;
This space is mainly used to store quilts that are not used in seasons, usually at the top of the wardrobe.
(7) The height of the shoe box can be designed according to the height of the two shoe boxes, and the control is optimal at 25-30 cm;
(8) The height of the storage backpack is more flexible. It should be considered from the perspective of the overall design of the wardrobe. As far as possible, the size requirements of other spaces should be “flatâ€. The space of my house is the same as the size of the storage quilt. .
(9) When installing the clothes rail, it should be noted that the clothes rail must be taken as the standard of the actual depth of the wardrobe, and the distance above the board must be 4-6 cm. This size must be met because The distance is too short, and it will be more difficult to put the hangers in the future; the distance is too long and the space is wasted.
Clothes rails also belong to the hardware series, I still recommend that you do not figure out the cheap. There should be at least two or three screws on both sides of the good clothes rail. When positioning the hole, be sure to pay attention. It is necessary to install three clothes rails for the "Storage" and use my afternoon time and brains. sweat.
(10) The height of the clothes rail should be the height of the hostess plus 20 cm.
IECEx Approved Coriolis Mass Flow Meter
Zhejiang Sealand Technology Co., Ltd. is a trustworthy manufacturer of Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor & Mass Flow Sensor Coriolis, ATEX, IECEx & CE approved.
The meter can be connected with computer as follows. Connect the meter and computer with a USB-to-RS485 converter( converter A+ end to transmitter A+ end, B- to B-, and GND to GDN); turn to device manager of the computer to check COM port connected with meter. Start the software, select the right COM port and click Connect; do not change any other parameters (if you do not know the right one, click Automatic options on the left, click Connect, plug & unplug the transmitter, and then check if it is connected). You can click Connect on the tool bar to disconnect or connect again. It will shown Connected/Not Connected at the bottom of this interface.
The flow direction is settable. There are 4 options, forward(default), reverse, absolute value & bi-direction. There is a direction mark on the sensor. Forward means the same direction with the mark on sensor, the meter will only count the flow in this direction; reverse means the opposite direction of the mark, the meter will only count the reverse direction; bidirectional means that the meter will measure both directions, it increases when it is forward and decreases when reverse; absolute means it increases no matter it is forward or reverse.
Mass Flow Transmitter, Coriolis Mass Flow Transmitter, Coriolis Mass Flow Sensor, Mass Flow Sensor, Mass Flow Sensor Coriolis
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeters.com