“Customers hope that the more supply, the better, the current supply is not enough.†Zhejiang Shangcheng Technology Co., Ltd. insiders also expressed the same “troubleâ€.
Expanding production has become a top priority.
Listed companies are not bad money. Tiantong (600330) plans to form an annual production capacity of 10 million 2-8 inch crystals and wafers by 2015.
Crystal Optoelectronics (002273) indicated that this year, the sapphire substrate and PSS will be further expanded according to market demand. The specific expansion will not be announced in detail.
The reporter looked through the "Consolidated Earnings Forecast Review Announcement" released by Crystal Optoelectronics at the end of 2013 and found that the revenue of Crystal Optoelectronic Sapphire LED substrate in 2013 is expected to be 105.7776 million yuan, the cost of this business is removed 72.421 million yuan, sapphire LED lining The bottom profit is 33.556 million yuan.
Jingsheng Electromechanical (300316) invested in the “annual production of 25 million mm sapphire crystal rod production project†with Zhonghuan in May last year. It is expected to invest 100 sapphire crystal growth furnaces in the first half of this year, with large size.
The sapphire business of Dongjing Electronics (002199) comes from the subsidiaries of Zhejiang Dongjing Optoelectronics, Huangshanjing Optoelectronics, and Dongjing Bolant. However, the current sapphire substrate products for LED are currently in small batch production and customer certification.
Even so, with the concept of "sapphire", the stock prices of these listed companies are not too ugly, and government subsidies are indispensable.
Sanan Optoelectronics, a wholly-owned subsidiary of Fujian Jingan Optoelectronics Co., Ltd. received a subsidy of 13.6 million yuan from the Anxi County Finance Bureau in December last year.
Jinfu New Materials has also received project funds of RMB 5 million from the Electronic Development Fund Management Office of the Ministry of Industry and Information Technology for its “Industrial R&D of Nano-imprinted Sapphire Substrate Patterning†project. The company claims that nano-embossed sapphire substrates have increased brightness by more than 50% compared to LEDs grown on conventional sapphire substrates. However, the project is currently in the sample trial phase and the expected completion period is 3 years.
There is no government subsidy, no funds are raised, but private enterprises will not miss this wave of “expansion of productionâ€.
“This year Jixing new materials have expanded, and the production capacity in June will reach 300,000 pieces/month.†Cai Jinrong, deputy general manager of Jiangsu Jixing New Materials Co., Ltd. claimed.
“Yuanliang Optoelectronics is also expanding production. This year, 200 sets of 100 kg furnaces will be added.†Huang Xiaowei, chief engineer of Yuanliang Technology Co., Ltd., told reporters. “20%-30% of the capacity will be used in the LED field, and the rest is for other uses.â€
The warm sun of the sapphire substrate market has also stimulated the nerves of sapphire-related equipment manufacturers.
Dazu Laser (002008) recently responded to investors' questions and said that in the field of LED sapphire substrate cutting, the company's sapphire cutting equipment has been scaled up, and the unit price is RMB 2 million to 3 million.
But for the sapphire substrate market "suddenly" warm sun, Cai Jinrong showed a bit calm. "Now the sapphire substrate in the LED field is not much better, because the material for crystal production is rising, and the overall production cost is rising under the condition of labor cost and processing cost, but the price increase of sapphire flat substrate is higher. Difficult, so the profit of the manufacturers is still not very optimistic." Cai Jinrong said.
Perhaps it is the poor profitability of LED sapphire substrates, sapphire substrate manufacturers have found business opportunities for non-LED applications and actively explore.
The iPhone 5S's Home button and the camera's protective cover all use sapphire material, and the new generation of Apple products on the market will also use sapphire materials.
"We have been providing sapphire materials with Apple's suppliers, and customers say how much it will cost." Insiders said.
According to foreign media reports, Apple and sapphire glass supplier GT Advanced reached a total of 576 million US dollars production agreement, the news that GT Advanced can produce 100 million to 200 million 5-inch iPhone sapphire display for Apple.
According to LED superside research associate manager of global energy research firm TrendForce, Yu Chao said that in the non-LED market demand, the demand for handheld applications is relatively strong, except that Apple introduced sapphire material into iPhone camera protection lens and Home Button application. LG also introduced the sapphire camera protection lens to the latest product LG G2, which is expected to drive the relevant mobile phone operators.
LEDinside estimates that the proportion of sapphire materials used in the non-LED market will reach 36% this year, with demand for handheld applications reaching 31%.
Welcome to do business with us
Size: 1/2''~6''
Class Rating: 3000~6000
Facing: RF(raised face);FF(flat face);RTJ(ring type joint);RJ(ring joint face)
TG(tongue and groove face);MFM(male and female face)
Manufacturing process: Push, Press, Forge, Cast, etc.
Material:
Carbon steel:
ASTM A105;
ASTM A266 GR.1,GR.2,GR.3,GR.4
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A694 F42/F46/F48/F50/F52/F56/F60/F65/F70;
ASTM A182 F5a/F5/F9/F11/F12/F22/F91;
ASTM A350 LF1/LF2/LF3;
Duplex steel:
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
SALES@GHSAILINGPIPE.COM
SALES@GHSAILINGPIPE.COM
The supporting tube stand is also called the branch pipe seat, saddle seat and saddle type pipe joint. It is mainly used for reinforcing pipe fittings of branch pipe connection, instead of using different diameter three - way, reinforcing plate and strengthening pipe section. It has the advantages of safety, reliability, lower cost, simple construction, improvement of medium channel, series standardization, convenient design and so on, especially in high pressure, high temperature, large diameter and thick wall pipe. It is widely used instead of the traditional branch connection method.
The main body is made of high quality forgings, and the material is the same as that of pipeline materials, such as carbon steel, alloy steel, stainless steel and so on. Both the pipe and the head are welded, and the joint of the branch pipe and other pipes, such as the short pipe, the plug and so on, the connection of the instrument and valve, has many types of welding, socket welding, thread and so on.
Criteria: MSS SP 97, GB/T 19326, pressure: 3000#, 6000#
Branch Outlet Fittings,Astm A694 F52 Weldolet,Hydraulic Branch Outlet Fittings,Socket Welding Fitting
HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com