First: We must first prepare the tools, need to drill a drill, at least 4 expansion screws, and a wrench. Start the installation, first take the back strip on the crystal lamp, and look for a few holes on the back strip to find a way to print on the place you need to install.
Second: Pick up the impact drill and put four eyes at least 5 cm deep on the print you painted. Insert the expansion screw and tighten with the adjustable wrench to fix the screw. Then you can fix the back strip, put the back strip on the expansion screw and tighten it with a nut, then put the whole crystal lamp on it and put it with the nut.
Third: just look at the drawings and slowly hang the crystal beads. When you hang up the crystals, you're done.
The above methods are easy to understand, so it is easy to master, and at the same time, at the same time.
Roll Up Door Servo Motor,Automatic Roller Shutter Door Opener,Roller Shutter Door Servo System,Glass Sliding Door Motor
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.pvchighspeeddoor.com