Home renovation is a very troublesome thing because it requires a lot of attention. For example, problems such as floor heating, many people do not understand the flaws inside, so that the decoration workers are cheating. There are also many mistakes in the renovation project that has been circulating in the market. Today, Jiuzheng Building Materials Network introduces six floor heating and decoration misunderstandings, and guards against mistakes.
1, the floor heating will definitely increase the floor load
Some communities have no industry to worry that the owner will increase the load on the floor when doing floor heating, so the community is not allowed to do floor heating. In fact, ultra-thin floor heating products, without pouring cement, will not increase the weight of the building.
2, the floor heating will occupy the floor height
Residents in China are more concerned about the height of the living room. The most important problem in communicating with the owners in the business seems to be the high degree of calculation... The thinnest floor heating is only 12MM, which has almost no impact on the floor height.
3, the floor heating pipe will block
Independent heating generally uses a wall-hung boiler. The water in the floor heating circuit is closed, and generally does not need to be replaced, and there is no possibility of blockage. The floor heating that is connected to the central heating system does have to consider the problem of plugging due to the problem of corrosion aging of the central heating pipe. However, it is sufficient to add a filtering device when doing floor heating.
4, the heating of the floor heating pipe will make a loud sound, will affect the residents downstairs
The water in the floor heating circuit is closed and has no gas. It is very calm during operation and does not make a sound. Floor heating will only help to soundproof.
5, water leakage problem
The life of a good quality pipe is even longer than the life of a building. Some people have to destroy it. If there is a problem with the quality, the owner can find a floor heating installation company and a pipe manufacturer claim. But the floor heating project does not seem to be so fragile.
After the water leakage, the traditional floor heating needs to plan the ground, but it is not necessary to plan all the holes. If you press the pressure, you can find which circuit has a problem. After the new floor heating finds the problem, it is also necessary to uncover the floor treatment problem, but it is relatively simple to deal with the problem.
If the home is equipped with a gas stove, the warm water is closed and the water volume is not so large to the extent of the water. The ultra-thin floor heating has a maximum of 2.16 liters of water.
6, under the legs of the furniture also need to do warm floor laying
"My home renovation is less than half a year, and the floor of the bedroom is somewhat deformed." Mr. Yang was puzzled. Later, when I found a professional check, I realized that it was the bed in the bedroom. Mr. Yang’s bed has no bed legs, and the entire bed is in direct contact with the ground, and the hot air is blocked under the bed.
Expert analysis: If the indoor pavement is a floor heating floor, do not make fixed decorative parts or place legless furniture on the floor. Because the floor heating floor is a cooling surface, the hot air circulates from the bottom to the top, producing a greenhouse effect. If legless furniture or the like is placed on the floor, the heat dissipating surface will be reduced, which not only causes the heat effect to be weakened, but also does not allow the heat to be sufficiently dissipated.
Komatsu Drive Parts,Komatsu Final Drive Parts,Komatsu Final Drive Assembly,Excavator Final Drive Parts
JINING SHANTE SONGZHENG CONSTRUCTION MACHINERY CO.LTD , https://www.stszcmparts.com