Fire safety equipment management

School Fire Equipment Safety Management

Fire work is the focus of school safety work. It is especially important for primary school students to strengthen fire safety education. In order to do a good job of the school's fire safety work, increase the intensity of school fire knowledge propaganda, and prevent the occurrence of fire safety accidents, a special management system has been formulated:

1. Strengthen school fire safety education. According to the characteristics of the school, teachers and students shall be educated on fire safety and fire escape. Allow students to understand various common types of fire, know the fire alarm (119) and other alarms. Educate students to understand that they do not play with fire in public places, understand the causes of fire, understand and use common fire extinguishers, and initially grasp the methods of extinguishing minor fires and common sense of escape.

2. When a fire is found, promptly press fire extinguishing battle plan and call 119 to notify the public security fire department and report the department head.

Regularly check and maintain the fire-fighting equipment so that it can be used at any time; timely re-powdering of fire-fighting equipment that exceeds the valid period;

3. The fire-fighting equipment in the dedicated classroom is promptly reset by the teacher's casually moved position; the cleaner is required to scrub the fire-fighting equipment on a monthly basis.

4. Students are prohibited from carrying fireworks, firecrackers, matches, and other inflammable and explosive materials into schools or other public places. The flammable and explosive materials and medicines used for experiments in schools should be managed by special personnel, stored in special places, kept strictly in the system, and used and received. They should be cleaned immediately after use and returned in full.

5. Equipped with certain fire-fighting facilities and equipment in accordance with fire management regulations, and strengthen management, love and protect fire-fighting facilities and equipment, and frequently check school water, electricity and gas equipment. Regularly overhauling circuits and various electrical appliances to ensure that schools do not lead fires due to circuit aging and electrical failures.

6. It is strictly forbidden to store flammable firewood and articles in school empty rooms or other eaves, and it is forbidden to smoke and throw cigarette butts in schools, laboratories, computer rooms, kitchens, etc. to prevent fires.

7. The school shall organize fire drills to understand the fire facilities and equipment in different public places. In the fire, students can quickly organize students to escape from danger and do not organize underage students to participate in firefighting.

8. Safely use electricity. After work, employees should cut off the power supply in the workplace. It is forbidden to illegally use the electricity circuit in school. Pay attention to remind the staff to regularly check the electrical and power lines to prevent the fire caused by the aging of the wire. .

9. The school ensures that the evacuation passages and safety exits are unimpeded, and fire safety evacuation signs and emergency lighting facilities complying with the national regulations are installed. The installation position of the evacuation indicator signs should be below the waist. Organize inspections and maintenance on a regular basis to ensure that the firefighting facilities and equipment are intact and effective.

10. Schools carry out various forms of publicity and education activities in light of the characteristics of "safety month activity", "119 firefighting activity day" and seasonality.

Enterprise company fire equipment safety management

1. According to the safety production responsibility system, a fire safety responsibility system and a post safety responsibility system shall be established step by step, with clear responsibilities and inspection systems.

2. The company’s safety officer office conducts fire inspections every month. The company’s safety office conducts quarterly inspections and reviews for the whole plant.

3. During the investigation, discover the hidden dangers of fire. The inspectors should fill in the records and sign the personnel in the record book as required.

4. The inspection department shall promptly notify the inspection department in the form of books and periodicals, and the inspection department shall timely rectify the hidden dangers according to the notice requirements.

5. Combustion and explosives dangerous goods should be placed in designated locations in the warehouse, equipped with necessary fire extinguishers, access to flammable and explosive materials should be implemented in accordance with the rules of safe operation, warehouse workers should stick to their positions, and non-workers should not enter at random.

6. If the hidden danger of fire discovered in the inspection is not rectified in time according to the stipulated time, it shall be punished according to company regulations by 10-100 yuan.

Firefighting facilities and equipment maintenance management system

I. Firefighting Facilities Maintenance Management System

1. According to the annual, monthly and daily requirements for management and maintenance, the annual work shall be organized by the fire safety manager. Each month shall be organized by the person in charge of the safety department and the professional maintenance unit. Each day shall be carried out by the head of the head of the safety department.

2, daily work:

(1) Check whether the alarm controller function is normal,

(2) Check the water level and valve opening and closing status of the fire water tank and fire water tank;

(3) Check whether the power indication of the power distribution cabinet of the pump room is normal;

(4) Check whether indoor fire hydrant and spray pipe pressure gauge values ​​are normal;

(5) Check the status of hydrant, shower pump outlet valve and Check Valve;

(6) Record the relevant situation in the operation record.

3, monthly work:

(1) Automatically or manually inspect the functions of control, display, operation and linkage of fire prevention, smoke extraction equipment, fire shutters, indoor fire hydrants, automatic sprinkler systems, aerosol automatic fire extinguishing systems, and fire emergency broadcasting;

(2) Each month, select different areas for full linkage testing to observe the feedback status of fire control equipment in the fire control monitoring center;

(3) Start the test on the fire hydrant pump, spray pump and regulator pump to check the operation of the distribution facility and the pump;

(4) Check whether the main power supply, standby power supply and charging are normal;

(5) Regularly overhaul and maintain the equipment, fill in the written records carefully, and complete the equipment technical file for large-scale maintenance projects.

4. Work every year:

(1) Entrust a qualified fire-fighting facility inspection company to conduct a comprehensive inspection, testing, and maintenance of the fixed fire-fighting facilities.

(2) Maintain the outdoor water pump combiner twice a year in April and October, and do anti-freezing measures in October, and contact the public security fire brigade to carry out the fire water supply test of the fire engine through the water pump coupling.

Second, the fire equipment maintenance management system

1. The competent security department is responsible for organizing and implementing the fire equipment maintenance and management system.

2. The fire equipment shall be in accordance with the "Code for the Design of Extinguisher Configuration for Buildings" and other relevant regulations to determine the number of configurations and types of models and reasonably set distribution points.

3. The competent security department shall be responsible for the establishment of maintenance files for fire extinguishers, self-rescue masks and other equipment, and shall record the type, configuration quantity, location, and maintenance management personnel, and shall make maintenance cards for the express purpose.

4. Each month, the responsible persons responsible for the maintenance and management of various departments cooperate with the security department to check the fire-fighting equipment in the area of ​​responsibility.

(1) Whether the fire extinguishing equipment is placed in a dry, cool and easily accessible place; whether the storage pressure meets the requirements, whether the jet hose is damaged due to aging, the nozzle is blocked, and the fire extinguisher box is locked and locked;

(2) Whether the self-rescue mask is placed in a designated place that is easy to access, dry, and protected from light, and is missing;

5. Organize or entrust the maintenance organization to perform a functional inspection of all fire extinguishers every 12 months. The portable dry powder fire extinguisher shall be tested for 5 years from the factory date and every 2 years thereafter. The portable pressure storage dry powder fire extinguisher shall be used effectively. For 10 years, the effective use time of the pusher-type pressure dry powder fire extinguisher is 12 years. The effective use time of the self-rescue smoke mask is 5 years from the factory date, 8 years for the gas mask, and mandatory scrapping upon expiration.

Fire equipment maintenance and maintenance

According to the spirit of the "Fire Regulations of the People's Republic of China", fire-fighting equipment is the main tool in fire-fighting work. In order to ensure that the fire-fighting equipment can play its due fire-fighting effectiveness once it finds a fire, it really protects the company's property from the loss. To ensure the integrity of our company's fire-fighting equipment, this system is specially formulated.

First, the use and management of fire equipment:

1. All the company’s fire-fighting equipment is a full-time safety officer. All kinds of fire-fighting equipment must be made. The fire-fighting equipment must not be used for other purposes (ie, “not allowed to be”), diligently checked, diligently cleaned, and maintained (ie, “three”. "Diligence"), set aside custody, location, regular replacement of drugs (ie "three set").

2. Fire-fighting equipment and facilities such as fire extinguishers, fire hydrants, fire hoses, etc., which are arranged in various departments, shall not be used for non-fire-fighting purposes. It is strictly forbidden to joke and play with fire extinguishers at will. If there are any of the above violations, the offender shall be punished according to the circumstance according to the regulations.

3. In case of fire, fire or fire, the use of fire-fighting equipment must be put in place afterwards. The empty fire extinguisher should be centralized in the office of the full-time safety officer in the company's security office.

4. If the relevant department needs to use fire-fighting equipment and fire extinguishers due to work needs, it should contact the full-time safety officer and must obtain permission from the full-time safety officer to use it. If it is used automatically, it shall be punished according to regulations. After the work is completed, it shall be returned to the original place and sent to the office of the full-time security officer in the security room with an empty fire extinguisher.

5. Fire fighting equipment is necessary for fire extinguishing. Therefore, it is the responsibility of employees in each department of the company to protect and maintain fire protection facilities. Those found to have damaged or unauthorized use of fire-fighting facilities have the right to stop and report to the full-time security personnel of the General Office. Those who have stopped will be rewarded for recognition.

6. All departments should take good care of the completeness and good performance of the firefighting facilities in their respective areas. No one may move freely, and there shall not be random stacking of objects around them to prevent their use.

Second, the maintenance and repair of fire equipment:

1. The fire protection equipment of each set point in the factory area shall be managed and maintained by the full-time safety officer of the Safety Committee of the General Office of Economics and Management. Regular periodic inspections shall be conducted to identify problems and timely rectification.

2. For various fire extinguishers, the full-time safety officer checks once a day. The inspection results are recorded in the "daily safety inspection table."

3. The fire extinguishers arranged at each fixed point in the factory area, where outdoors, must do a good job of anti-freezing and warm-keeping before winter comes.

4, the use of fire extinguishers must be promptly cleaned, filling and relentless.

5. Fire hydrants and other fire-fighting equipment in the factory, full-time security personnel must regularly check the test results to ensure normal.

6. All departments, team members, and office employees found that fire-fighting equipment had problems such as damage, leakage, loss, etc. All of them should consciously report to full-time security personnel in a timely manner so that the maintenance of fire-fighting equipment became an obligation of the entire plant employees.

7. After the fire extinguisher is used, it should promptly go to a qualified maintenance company to inspect, replace the damaged parts, refill the extinguishing agent and driving gas before the expiration date, and make a record to prevent the extinguishing agent from expired.

8. If there is any damage to the firefighting facilities, a “Application Form for Maintenance of Equipment” should be completed and repaired promptly. The maintenance company designated by the firefighting department shall carry out the repair. Any person shall not dismantle the firefighting facilities without permission. After the repair, the “Firefighting Facilities Maintenance Record” should be filled in, stating the reasons for maintenance, costs, measures, maintenance personnel, etc.

9. When the firefighting facilities are insufficient, the safety director shall fill out the "Applicant Purchase Requisition", the approval of the general manager shall be approved for 30,000 or less, and the approval of the general manager and approval of the company's financial management committee shall be more than 30,000. The fire-fighting facilities shall be purchased by the designated manufacturer of the local fire protection department.

10. This system shall be implemented from the date of promulgation, and amendments may be made after the implementation of the unfinished business.

Company fire equipment management system

1. Purpose

In order to ensure safety in production, standardize the management of fire-fighting equipment, make fire management work in accordance with rules and regulations, ensure that it is easy to use in an emergency, and prevent accidents from igniting, establish this system.

2. area

Applicable to the management of the company's fire equipment.

3 duties

3.1 The Administration Department is responsible for the configuration and management of the company's fire equipment, and is responsible for the management and supervision of fire equipment.

3.2 The security team leader is responsible for the inspection and use of performance-maintenance work for fire-fighting equipment, and is responsible for reporting and processing of inspection results.

4 fire equipment management system

4.1 Fire-fighting facilities and equipment In accordance with the division of the management area, the principle of “who is in charge and who is responsible” is implemented so that the fire-fighting facilities and equipment are often in a good stand-by state.

4.2 The quarterly fire hydrant in the company shall be checked once every quarter by the administrative department and electrician group.

4.3 Fire-fighting pumps shall be checked manually or automatically by the administrative department and electrician group every six months.

4.4 All kinds of electrical equipment of the company are jointly examined once a year.

4.5 Standby generators, which are periodically started by the Engineering Department in accordance with the equipment inspection schedule.

4.6 Portable hand-held 10 litre, cart-type 65-100 litre foam fire extinguishers shall be replaced by the administrative department once a year to supervise the replacement of pharmaceuticals. Replacement of other equipment shall be promptly replaced.

4.7 Where there are articles stored in the company's buildings, there are personnel portable places, public places, entertainment places, floor rooms, computer rooms, electric rooms, gas stations, kitchens, offices, etc. Jurisdiction department is responsible

Keep the custodial and appearance of cleanliness and hygiene, placing fire-fighting equipment in the place shall not pile debris, change the location of fire-fighting equipment, the consent of the fire-fighting center, intends to damage the fire-fighting equipment should be fine, the circumstances are serious to be held accountable.

5 Firefighting Facilities and Safety Labeling Regulations

5.1 In accordance with the fire code requirements, various fire-fighting equipment and facilities are equipped in the management area, and the signs are installed in a suitable and prominent position.

5.2 All kinds of logos shall not be used for other purposes, and the responsible department shall implement the provisions of the full-scale survey on a monthly basis to ensure the integrity of various logos.

5.3 Identification Names and Functions

5.3.1 Identification of public facilities

5.3.1.1 The floor lights and floor number identifications are installed in the elevator halls on each floor. Their role is to inform people about your floor.

5.3.1.2 The emergency indicator signs are installed in the passages and stairs of each floor of a residential building. Their role is to be used for emergency lighting in the event of a fire and to indicate the direction in which people are safely evacuated.

5.3.1.3 Prohibit smoking signs. There are no smoking signs on public places and elevator boxes in the management area. The purpose is to remind people not to smoke in public places and to be civilized to prevent fires.

5.3.1.4 Fire-fighting equipment identification. There are indicating signs installed in the layers pointing to the fire extinguishers at each floor. Its role is to remind people to set fire-fighting equipment in that direction and use them in time if a fire occurs.

5.3.1.5 Fire alarm identification. Fire alarm telephone signs are installed in the channels of each floor. Their function reminds us to remember the fire alarm at all times and to give a warning in case of fire.

5.3.2 Identification of fire-fighting equipment systems

5.3.2.1 For the identification of fire water supply pipelines, the fire-fighting water supply pipes in the building shall be red in accordance with the requirements of the code, and shall be clearly numbered on the pipe to indicate that the pipe is the area where the hydrant system or shower system supplies water.

5.3.2.2 For the identification of fire hydrants, words of fire hydrants shall be printed on the doors of all fire hydrants in the management area, prompting people to have fire hydrants at that location.

5.4 Logo of Fire House

5.4.1 The identification of the fire pump shall be marked with the pump number, power, etc. on each pump.

5.4.2 The identification of the fire water tank is marked with the fire water storage limit mark on the water supply box.

5.4.3 The identifier of the exhaust fan shall be marked on the fire fans in the management area, with the fan numbers "P", "S", and the words "power".

5.4.4 The identification of the monitoring center is placed at the door of the monitoring center, and the signage of the monitoring center is hung. On the console of the watch room, there are indications for the signals of the power supply systems, control operation buttons and other specific words.

5.5 Fire-fighting facilities, equipment management logo include

5.5.1 Identification of fire control facilities and equipment management.

5.5.2 Fire service equipment inspection and maintenance record identification.

5.5.3 Fire Equipment Test Run Record Identification.

5.5.4 Identification of the failure of fire fighting equipment maintenance.

5.5.5 The identity of the various management systems of the monitoring center for fire protection.

5.5.6 Identification of the fire fighting operation plan and the fire extinguishing command system diagram.

5.5.7 Fire Piping and Plan Identification.

6 Fire Equipment Management

6.1 Fire-fighting facilities and equipment According to the division of the management area, the principle of “who is responsible and who is responsible” shall be implemented so that the fire-fighting facilities and equipment will always be in good standby condition.

6.2 The Administration Department conducts two regular inspections, clean-ups and registrations of fire-fighting facility equipment every year.

6.3 Fire hydrants, boxes, glass, door locks, valves, hoses, water guns, manual alarms, hammers and accessories are often in good standby.

6.4 Fire water pump, valves, pipes, pressure gauges, sprinkler automatic fire extinguishing system monthly test once.

7 equipment configuration

7.1.1 The Administration Department is responsible for the planning and configuration of the factory's fire fighting equipment.

7.1.2 The allocation of fire equipment should comply with the relevant provisions of fire technology, and the configuration should be appropriate, applicable and reasonable.

7.2 Registration and storage

7.2.1 The fire-fighting equipment shall be assisted by the security team for inspection. The inspection shall include: performance, specifications, quantity, use validity period, and scope of use, etc., to confirm compliance with the relevant provisions of the Public Security Fire Bureau, and all those who do not meet the standards shall be returned for purchase and replacement.

7.2.2 The fire-fighting equipment that has passed the inspection and is in compliance with the standard shall be handled by the administrative department.

7.3 Use and Maintenance

7.3.1 Use of fire extinguisher: A fire extinguisher is a portable fire extinguisher that can be moved by manpower. He can spray the filled extinguishing agent under the action of its internal pressure to extinguish the fire.

7.3.1.1 Fire Extinguisher Configuration In the fire box on each floor, the fire box shall be located in a designated place that is conspicuous, ventilated, dry and clean, free from exposure to the hot sun, without contact with heat or violent vibration.

7.3.1.2 Fire extinguishers shall be kept clean, tidy and free of dust; the nameplate shall be outward and clearly marked.

7.3.1.3 The storage of fire extinguishers must be available at the time of alarm.

7.3.1.4 Fire extinguishers are only allowed to be used in the event of a fire and when training is required. They are generally not allowed to be used for other purposes or for loan purposes. Special circumstances require lending, subject to the consent of the head of the administrative department.

7.3.1.5 The fire extinguishing equipment for training is led by the security team leader. After the training is completed, it shall be returned in a unified manner. If it has been used, it shall be replaced or promptly filled with extinguishing spray and returned to its original location.

7.3.1.6 The fire extinguishing equipment temporarily borrowed due to work needs shall be approved by the company's safety person in charge before it is confirmed by registration. It shall be returned promptly after use.

7.3.2 Fire extinguisher maintenance

7.3.2.1 After each use, the fire extinguisher must be sent to the maintenance organization (hereinafter referred to as the maintenance organization) that has obtained the maintenance permit to inspect, replace the damaged parts, and refill the extinguishing agent and driving gas. 7.3.2.2 Perform monthly performance inspections periodically.

7.3.2.3 Extinguisher inspection items include the following items:

(1) Whether the pressure gauge pointer is in the green area (if the cause is checked in the red area, it is found that the weight is reduced by 10%, and the inspection should be promptly filled).

(2) Whether the seal is in good condition (once it is opened, it must be refilled in accordance with the regulations, and a sealing test and re-seal should be performed)

(3) Whether the nozzle and injection pipe are blocked or corroded; whether the push-type fire extinguisher is flexible or not.

(4) whether the spray tube is unblocked (if the clogging should be promptly cleared)

(5) The appearance inspection found that the conditions listed in 4.3.3.1 must be treated as waste.

7.3.2.4 Check The maintenance must be performed in one of the following situations:

(1) The rubber of the fire extinguisher is deformed, aged, or broken.

(2) Defects such as deformation and damage are found on the outer surface of the pressure gauge, and the pressure value is not displayed properly or blurred.

(3) The nozzle has defects such as deformation, cracking, and damage.

(4) The metal parts of the pressure extinguisher, valve body, etc., have serious defects such as damage, deformation, corrosion, etc. The thimble has visible defects.

(5) Aging leaks are found in seals and gaskets.

(6) The exhaust pipe of the fire extinguisher has defects such as bending, clogging, damage and cracks.

7.3.2.5 Fire extinguishers that have been repaired shall be filled with fire extinguishing agents that meet the requirements of the fire extinguishing agent.

7.3.2.6 After maintenance, the fire extinguisher must be affixed with maintenance identification plate:

(1) The maintenance identification plate shall have the following contents: the name of the maintenance organization, the serial number of the maintenance permit, the pressure value of the cylinder body pressure test Mpa, and the maintenance year and month.

(2) Nameplates for each repair are not allowed to cover each other

(3) The nameplate of the gas cylinder's permanent maintenance (not allowed to use steel) shall be marked with the filling factor of the gas cylinder and the filling volume of the driving gas. At the same time, there shall be the name of the maintenance unit and the year and month of inflation.

7.3.2.7 It is strictly forbidden to use organic solution to wash the surface of the fire extinguisher

7.3.3 Retirement of fire extinguishers

7.3.3.1 The fire extinguisher must be scrapped if it has one of the following conditions.

(1) Severe corrosion of the cylinder (a large area of ​​the paint peels off, the rust area is greater than or equal to one-third of the total area of ​​the cylinder) or the joints and the bottom of the cylinder are heavily rusted.

(2) The inner button head is not (or not installed) a bleeder screw and a set screw.

(3) The cylinder is severely deformed.

(4) Unreasonable structure (such as the flat bottom of the cylinder; the outside of the gas cylinder, the dry powder fire extinguisher from the cylinder into the cylinder body)

(5) No manufacturer's name and year of manufacture (including decals, or decals, but the manufacturer's name and year of manufacture cannot be seen)

6) The manufacturer did not obtain the production license.

(7) The public security fire department of the Ministry of Public Security or the provinces (cities, districts) has ordered the prohibition of sales and maintenance.

(8) The age of the fire extinguisher shall be discarded from the date of extinguishment of the fire extinguisher and reach the following year limit;

A portable chemical foam fire extinguisher - 5 years

b portable acid and alkali fire extinguisher - 5 years

c Portable water fire extinguisher - 6 years

d portable dry powder fire extinguisher (gas cylinder type) - 8 years

e portable dry storage powder fire extinguisher - 10 years

f portable carbon dioxide fire extinguisher - 12 years

g cart type chemical foam fire extinguisher - year

h cart type dry powder fire extinguisher (gas cylinder) - 10 years

i cart type pressure dry powder fire extinguisher - 12 years

j cart carbon dioxide fire extinguisher - 12 years

7.3.3.2 The fire extinguisher or cylinder that is discarded must be perforated on the cylinder body or bottle body, and must be affixed with (rejected) obvious signs and reported to the maintenance organization for disposal.

7.3.4 Use of fire hydrants:

Fire hydrant is a fixed fire-fighting water supply equipment. It includes hydrant and fire hydrant boxes. Fire hydrants and fire hydrant boxes are usually located on stairwells, corridors and indoor walls. There are hoses and guns in the box and they are connected to the fire hydrant outlet. The fire hydrant is connected to the fire water supply line. In the event of a fire, turn the handwheel in the opening direction and the water gun sprays out the water.

7.3.4.1 After the fire hydrants have been used, the hoses should be washed and dried, placed in the box by rolling or folding, and then the water guns should be stuck in the gun card and the door closed.

74.3.4.2 Water hoses and water guns are used only for fire water supply and peacetime training.

7.3.4.3 When the hose connections are connected to each other, they should be flexible, tight and moderate to ensure their tightness. They cannot be disengaged when they are pressurized.

7.3.4.4 The hoses (water guns) used for peacetime training should be lightly placed after rewinding, and it is forbidden to damage the interface of the hoses and throw water guns on the ground.

7.3.5 Fire Hydrant Maintenance

7.3.5.1 Once a month, check regularly whether the fire hydrants are in good condition and whether there is any rust or water leakage.

7..3.5.2 Check whether the interface gaskets are intact; whether the reels, water guns, water hoses are damaged, and whether the valves and reels rotate flexibly. If problems are found, they should be promptly repaired or replaced.

7.3.5.3 Conduct fire hydrant inspection once a month to ensure that water can be opened in time when a fire occurs.

7.3.5.4 Water hoses and water guns should be placed in a ventilated, dry place. Pay attention to moisture, shock, mold, corrosion, and breakage.

7.3.6 Retirement of Water Belts

7.3.6.1 Water hoses are damaged, bad holes (cannot be repaired, affect water pressure), hardening must be scrapped.

7.4 Management of Fire Fighting Equipment

7.4.1 The fire-fighting equipment required to be set up must be set up with a personal account.

7.4.2 Routine maintenance and maintenance, adhere to the management principles of (who uses, who is responsible, and who benefits).

7.4.3 The security leader regularly organizes and arranges the security guards to check and maintain the fire-fighting equipment in various regions on a monthly basis. During the inspection process, the security guard must register the discovered problematic fire-fighting equipment and place it in a designated area. The security guards After reviewing the captain, the captain summarizes the reports of the relevant regional fire safety managers and is responsible for the follow-up and recording of maintenance results.

7.4.4 The administrative department organizes relevant personnel to check and supervise the maintenance of the fire extinguishers stored by the company from time to time. If any problems are found, timely suggestions shall be made to ensure that the fire safety work is in place.

7.5 Violation Processing

7.5.1 All fire-fighting equipment and facilities shall be accompanied by an inspection signboard. The date of inspection and the inspector shall be clearly marked on the signboard.

7.5.2 No objects shall be placed in the storage area of ​​fire equipment and facilities. Otherwise, if it is found that the parties are held accountable and seriously dealt with, they shall be given criticisms. If individuals cannot be pursued, the person responsible for the storage of fire fighting equipment and facilities shall be serious. Deal with and report criticism.

7.5.3 All fire-fighting equipment and facilities are limited to fire-fighting purposes only, and are prohibited from occupying, misappropriating for other uses or moving positions, or deliberately damaging them. Otherwise, once the parties concerned are found to be held accountable, they will be severely dealt with and report criticism; Personally, the person in charge of the department for the storage of fire-fighting equipment and facilities was seriously dealt with and reported criticism.