Tile adhesives are generally divided into ordinary tile adhesives, reinforced tile adhesives, and heavy brick tile adhesives. Among them, the ordinary box tile adhesive is suitable for the bonding of various kinds of floor tiles or small wall tiles of common mortar; the reinforced tile adhesive has strong adhesive force and falling performance, and is suitable for larger wall requirements. Tiles, old finishes, wood boards, etc. Next, Xiao Bian will introduce to you the benefits of using glue and tile adhesive for wall tiles.
What glue on the wall tile
1, deacetic acid type
Its vulcanization speed is very fast, but its transparency is good. Acetic acid is easily released during the curing process. It has a strong odor and is corrosive to metals, coated glass and some inorganic materials.
2, dealcohol type TC
This type of curing shrinkage is relatively small, the possibility of immersion in water is low, most of the substrates are non-corrosive; the adhesion of fluorocarbon profiles, steel and marble is relatively poor; at high temperatures, it will Because the reaction is too fast, small molecules cannot be volatilized in time, thereby forming bubbles and affecting the quality of construction.
3, deacidification type
If it is an acidic glue, it should not be used on cement and stone, because acidic glue will cure to produce acetic acid, and it will react with the surface of alkaline materials such as cement and stone, and the coefficient of expansion of the substrate is large, and there may be displacement or vibration. When the construction is too thin, it can easily cause the wrinkling of the surface of the neutral glue. If the neutral glue is used together with the acid glue, it may cause the neutral glue to be too thin.
Tile adhesive construction method
1, first clean up the construction surface, should maintain the surface to achieve a solid, dry, clean, no stains and other states;
2. Mix the tile glue in clean water into a paste with a proportion of 25 kg and add about 6-6.5 kg of water. After mixing, wait for about 10 minutes and stir it again. After 2 hours use, do not put the dried glue. Reuse glue.
3, tooth-type scraper will be spread on the wall glue, evenly distributed about one square meter, in 15 minutes like the tiles can be rubbed on. If you need to adjust, you need to fix the tile adhesive before it is fixed.
4. Take care to keep the expansion joints. The product is suitable for use in an environment of 5°C to 40°C. Only after 24 hours can it be stepped in or caulked.
Tile adhesive benefits
1, simple environmental protection
The product does not add harmful substances and no waste or dust is generated during construction. One does not pollute the environment, and the second does not affect the health of construction workers. Simplify the construction steps, add water and stir on site, and use it without tiling.
2, energy saving
In the traditional concept, most of them use cement tiles, which are not only not strong enough, but also consume a lot of cement. However, tile adhesives are very material-saving and thin to only 1.5mm adhesive layer, which can also generate sufficient adhesive force and can greatly reduce the amount of materials used. From the traditional paving, the amount of cement needed per square meter is reduced from 1 to 18 KG to 4 to 5 Kg of tile adhesive. Each worker of tile adhesive can finish about 30 to 40 square meters of tile paving daily, while the traditional method of construction, Each worker can only finish 5~8 square meters of paving each day. According to the above estimates, the cost per square meter of tiles can be saved by more than 40%. The more you use, the lower the cost.
3, high security
It is a terrible thing to drop a tile, so it is necessary to ensure the firmness of the tile. The adhesiveness of the tile adhesive is high, and it can firmly adhere to the tile and prevent the tile from falling off. The higher adhesive strength is 2-3 times that of cement, and the tiles cannot be dropped;
4, can maintain a good decorative effect
Low alkalinity prevents the dissolution of calcium hydroxide and salts to form pantothenic phenomena. Using a toothed scraper, the tile adhesive applied to the wall is scraped out of the texture. When the tile is tiled, the full slurry is effectively increased and the emptying rate is reduced;
Editor's summary: The benefits of what glues and tile adhesives are used on wall tiles are introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
What is the glue on the tile?
Wire Spring,Double Torsion Spring Design,Spring Steel Wire,Stainless Steel Spring Wire
OEM order and ODM order can is welcome
wire thickness : 0.07--5mm
applicaiton: viation,automotive, motorbike, bicycle, automatic equipment, household appliance, medical device ,toy, telecommunication,computer, instrument and meter,furniture, electric tools,mold and other industries
Wire Spring,Double Torsion Spring Design,Spring Steel Wire,Stainless Steel Spring Wire
Shenzhen Lanejoy Technology Co.,LTD , https://www.copper-nut.com