Analysis of some problems with aerated brick equipment blanks. Today, Henan Huayi Machine explains why the damage of the aerated brick equipment body is caused by damage.
In the past, the equipment for producing aerated bricks was free of autoclave and autoclaved aerated bricks. Although the autoclave was cheaper in all aspects, its performance in strength and compression was relatively poor, and the market was finally withdrawn from the market. . Currently popular on the market is the aerated block that has been autoclaved, so many manufacturers now only produce aerated brick equipment with autoclave curing process.
The pre-nucleation process of the aerated brick equipment embryo body is a tense process of the aerated brick production line process. If it is not carried out in accordance with the correct process, it will inevitably lead to damage of the embryo body.
In the process of producing aerated brick equipment, there will be many problems, so what are the most common types of damage to aerated brick equipment?
For the production of aerated brick equipment, the most common damage is generated in the cutting section, no matter the cause of the damage is there are many, which specific damage? Let us look at it together:
The first one, collapse: In the production of aerated brick equipment, the main reason for the collapse is that the strength of the green body is too low, and it cannot withstand the shaking and vibration during the lifting process after the cutting is completed.
The second one, the crispness of the blank after the crisp cutting is generally found after the autoclave curing, but the reason is that the management of the blank after cutting, when the blank is finished waiting for the cutting, will be a large number Loss of water, so that the hydrothermal synthesis reaction can not be carried out in the forward and reverse, therefore, after the completion of the cutting, should enter the kettle as soon as possible.
Third, crack: In the production process of aerated brick equipment, the blank did not show cracks when cutting, but cracks gradually appeared after cutting. Generally speaking, this is not caused by cutting, but the temperature of the blank High caused.
The article is provided by Henan Huayi Equipment Factory. The manufacturer recommends equipment: aerated concrete equipment, aerated concrete block equipment. Tel: 0391-3705666
Fax: 0391-3705003
Mobile: 13673607707
E-mail:
Address: Intersection of Zhongfu Road and Zhongye Street, Wen County Industrial Cluster, Jiaozuo City, Henan Province
China Built In Gas Oven, Gas Oven ,Gas Stove Oven Supplier
for this kind of goods ,we use good quality stainless steel with high quality GAS STOVE owen .
China Built In Gas Oven,Gas Oven supplier & manufacturer, offer low price, high quality Gas Stove Oven,Gas Oven With Stove, etc.
We support like this kind of goods to different coutnry for more than 20 years ,we had good experience .with good quality and competition price .
Built In Gas Oven,Gas Oven,Gas Stove Oven,Gas Oven With Stove
GAS OWEN
Built In Gas Oven,Gas Oven,Gas Stove Oven,Gas Oven With Stove
GUANGZHOU AIJINGSI TRADING LIMITED , http://www.aichugashob.com