Although the purchase of decoration rooms is less of a burden on the building materials market in search of bargains and bargaining, disputes caused by the quality of furnishing rooms have also occurred from time to time. In particular, when you choose to set up a lucky day to move to your new home after you have repossessed your house, you will face a series of decoration quality problems when you repossess your house. When the project is reworked and rectified is no longer in sight, distress and inconvenience will follow. Therefore, to learn decoration knowledge, in the construction phase before the resumption of the building involved in the acceptance of the project, you can take preventive measures.
Red House Ornaments Home Furnishing Museum
Acceptance in decoration
1, the acceptance of the water circuit
The owner can check whether all the transformation lines are unobstructed, whether the layout is reasonable, whether the operation is normal, and reconfirm the actual size of the line transformation under the operation of a professional hydraulic or electrician. Only after the line is changed, can the ash inlay workers seal the wall and putty.
2. Acceptance of carpentry size
After the carpentry foundation has been completed, ceilings and plaster lines in the room should also be completed. Wall tiles in the kitchen and bathroom are also well-attached, while the painted wall should be scraped twice. Acceptance work at this stage is very important, the owner should carefully check the drawings, confirm the size of the various parts, if found inconsistent place, promptly prompt the construction team to modify.
3, wood quality inspection
When all the veneer panels of wood products are well-attached and the wooden thread is nailed, the owner can accept the woodwork quality. This time is basically half of the time, the inspection of this stage should focus on the color and texture of wood products and large areas of flatness and gaps are uniform.
Acceptance after completion
After the completion of wood products, the painter can start the primer treatment work, and all the floor tiles should also be posted within this phase. This is the fifth phase of the phased acceptance. The content of acceptance at this stage is the most comprehensive and thorough.
The owner accepted the project and the standard was the decoration contract, the construction drawing signed by the owner, and the relevant documents of the relevant state department on the quality inspection of the decoration project. The acceptance was mainly from the following aspects:
Power lines: The circuit shall be laid in accordance with construction regulations and safety standards. The socket shall not be less than 30 cm from the ground. The three-wire socket shall be grounded. The kitchen and air-conditioning lines shall be laid in dedicated lines. The main gate shall be equipped with a leakage prevention switch and the lamps shall be firmly installed.
Doors and Windows: The switch is easy, and the door frame, window frame and glass are well sealed.
Ground: The floor tiles are flat, clear in texture, uniform in color, horizontal and vertical in the cross line, the floor is paved with smoothness, the joints are straight, and the paint has uniform color and no scratches.
Wall: The wallpaper has firm paste, tight joints, complete pattern, consistent pattern, clean edges and no burrs, and the coating is even and smooth, without any bumps, no color, and no dust.
Water supply and drainage facilities: The water supply pipe has no leakage, the on-off valve operates well, and the drainage is smooth without leakage or water accumulation.
Paint: smooth paint, good feel, enough oil, no nails, scratches, burrs and color.
The acceptance stage is not absolute in the actual construction. Different families have different requirements for the decoration content, and the construction progress will naturally have corresponding adjustments. The owner can flexibly grasp the progress of the project.
Inspecting house construction acceptance experience talk paint switch window socket room floor tile glass brick glass door kitchen glass sliding door bathroom door size bathroom ceiling bathroom floor tile bathroom door bathroom size home accessories decoration home
Elegant low profile high power LED linear luminaire for floodlighting, wall wash and wall graze applications to buildings, bridges, monuments. Light projection distance over 10 meters with choice of Cree or Lumileds LEDs in a variety of colours and beam angles for selection. Extruded aluminum profile of high efficient thermal dissipation design with clear tempered glass cover and anti-glare shield. Customizable housing color and length. Various stainless steel mounting brackets with up to 180° tilt angle adjustment for easy installation and light projection setup. Optional anti-glare shield. Seamless line of light when connected in cascade without dark spaces at joints. DC 24V input. DMX control. High brightness contrast level for smooth and consistent color change effect. Preventive vent, waterproof connectors and rated IP66.
Wall Washer,Wall Washer Light,LED Wall Washer,RGB Wall Washer,LED Wall Washer Graze Lights,Narrow Beam Angle Wall Washer,High Power Wall Washer
StrongLED Lighting Systems (Suzhou) Co., Ltd. , https://www.strongledcn.com