Shaanxi Provincial Local Standard officially implemented today

Shaanxi Provincial Department of Public Security and Shenzhen Infino Technology Co., Ltd. and other units compile Shaanxi Province "Video Monitoring Network Sharing System Technical Specifications" (DB61/T525-2011) and "Video Monitoring Network Sharing System Management Platform Specification" (DB61/T524-2011 ) Two local standards, approved by the Provincial Bureau of Quality and Technical Supervision, were officially released on October 14, 2011 and will be formally implemented on December 1.

The implementation of these two local standards will eventually realize the sharing of resources for the video surveillance functions of all provinces (districts) and counties across the province, improve the ability of public security agencies to crack down on crimes and prevent public security, and provide important technical and management basis for the construction of “Safe Cities”. .

The release of two local standards will make Shaanxi Province the second province in the country after Zhejiang Province. These two local standards stipulate the construction principles, system design, equipment selection, engineering construction, project detection, and project supervision requirements and methods for the province's video surveillance network sharing system, and stipulate the design of video surveillance network sharing systems. The units for construction, maintenance, supervision, and inspection, and the units engaged in safety technology prevention products and sales shall be registered at the Security Technology and Prevention Management Office of the Public Security Bureau of Shaanxi Province. The sales outlets for security technology and preventive products shall also be located at the local county-level public security agencies. Security Technology and Prevention Management Office is registered for registration. At the same time, it stipulates the composition, function, performance and interface requirements of the monitoring and alarm management platform, which is the basis for the design, construction, and acceptance of the video surveillance network sharing system.

Infinera's active participation in the drafting and formulation of two local standards is a reflection of the company's dedication to promoting the standardization and standardization of the industry, and the collective responsibility and determination to create a "safe Shaanxi and harmonious Shaanxi" for the entire nation. This is both a demonstration of corporate strength and a company The important embodiment of the industry's performance of responsibilities.

Pulp And Paper Gravel Pump

Pulp And Paper Gravel Pump


Product Introduction:

MG pump is including: Sand Pump , Dredge Pump , Sand Suction Pump, Coarse Sand Pump, Pulp and Paper Gravel Pump , Sugar Beet Handling Gravel Pump.

MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance.
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:

Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m

High Chrome Pulp Pump,Sand And Gravel Pump,Centrifugal Sludge Pump,Pulp And Paper Gravel Pump

SHIJIAZHUANG MUYUAN INDUSTRY & TRADE CO., LTD. , https://www.cnmuyuan.com