In autumn and winter, to maintain the warmth of home depends largely on whether there are high quality and high installation levels of doors and windows in our homes, with special emphasis on the windproof, watertight, airtight and material durability of doors and windows. In this issue, Xiao Bian will explain in detail the installation techniques of doors and windows, and let's understand it together.
The degree of confinement and stability of home doors and windows is not only to see the quality of materials, but also to see the construction process, to create a safe home, the selection of the material is not enough, but also the installation of precision, in order to achieve both The role.
Installation points 1: Be careful when filling materials
If you want doors and windows to have good airtightness and stability, pay attention to flatness during installation is the key. When installing windows and doors, leave a certain gap with the wall of the cavern. The gap must be sealed with an elastic material, and no cement mortar should be used. Finally, seal it with a sealant on the surface.
Installation point 2: Seal closely
The key to the sealing of doors and windows is to block the doors and windows and prevent air leakage. According to the season of construction, the tightness of the sealing strips of windows and doors is particular. Due to hot rising and shrinking, the sealing strips must be sealed tightly during installation in the summer to prevent the temperature from falling and the sealing strips shrinking. In winter sealing, the sealing strips must not be sealed too tightly. The seal deformed during the summer, affecting the seal. In addition, the selection of the sealing strip must be done with a material that has a high degree of softness at low temperatures, so as to prevent the inferior rubber sleeve from becoming hard at low temperatures.
Installation point 3: Slide length requirements
When installing push-pull doors and windows, the length of the track must be specified. It must be about 2mm shorter than the size of the inner mouth. Both sides need to have a margin, so as to avoid affecting the firmness of doors and windows.
Installation point 4: Waterproofing should be done well
The doors and windows can be coated with a layer of anti-corrosion paint or plastic film on the outside to prevent the cement mortar from directly contacting the surface of the doors and windows, resulting in electrochemical reactions, corrosion of the door and window frames, insufficient sealing, and seepage of water on rainy days.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Doors, windows, doors, windows, doors and windows maintenance
Medium Duty High Temperature Casters
High-temp wheels feature a standard operating temperature range from -30℃ (continuous service) to 280℃. These are molded from an exclusive engineered resin compound that offers non-marking floor protection, near zero water absorption, high load capacities, and long service life. A special manufacturing process enables these wheels to retain a consistent bearing bore even when exposed to elevated temperatures. Furthermore, Thermo wheels are 100% recyclable, and they are highly resistant to animal fats, vegetable oils, and salt solutions. The life expectancy of Thermo wheels is three times longer than high-temp phenolic wheels, and they offer an equal load capacity. Unlike high-temp phenolic wheels, Thermo wheels have no outer skin that can break and absorb water or other fluids. Medium duty High Temperature Casters can bear 90-120kg load.
Medium Duty High Temperature Casters, Black TPR High Temperature Caster, Brown TPR High Temperature Caster
Ningbo Mywin Caster Co., Ltd. , https://www.mywin-caster.com