With the continuous popularization of stainless doors, stainless steel doors have become the first choice of public entrance doors. Stainless steel doors are the popular luxury doors. How do we install stainless steel doors? Let's take a look.
Stainless steel door installation methods and precautions
1. Required tools and materials
(1) Impact drills, hammers, wire cutters, plumb, level ruler.
(2) Expansion bolt M10×100, wood chips or cardboard.
2. Measure whether the size of the door opening is consistent with the door frame. If the size of the door opening is too large or too small, it should be trimmed to adapt.
3, remove the stainless steel door leaf, put the door frame into the door hole, use the level ruler, plumb and other tools to check whether the door frame is placed flat, if necessary, add pad wood or hard paper, in the door frame mounting hole set hole position mark , Then remove the door frame.
4. Use a percussion drill to drill holes on a wall that has been marked. When drilling, it must be leveled. If there is a skew, it will directly affect the installation of the door.
5. Place the frame into the door opening, install the expansion bolts, and then pre-tighten the middle bolts to ensure that the rest of the bolts are fixed after the leveling.
6. Put the door leaf on the door frame and check if the switch is flexible and the position of the door lock is accurate. If there is any abnormality, you can make further adjustments.
7. After confirming that there are no other problems, tighten all the expansion bolts and secure the nuts and bolts if conditions permit.
Why do stainless steel doors "rust"?
1. The surface of the stainless steel door contains deposits of dust or other dissimilar metal particles containing other metal elements. In moist air, the condensed water between the attached matter and the stainless steel connects the two into a microbattery, which triggers an electrochemical reaction. Reaction, the protective film is destroyed, known as electrochemical corrosion.
Second, the stainless steel door surface adheres organic juice (such as vegetables, noodles, soup, etc.), in the case of water and oxygen, constitute organic acids, organic acid will cause corrosion on the metal surface for a long time.
Third, the surface of the stainless steel door is affixed with acids, alkalis, and salts (such as construction sites, alkaline water for decoration of walls, lime water splashing, and oxalic acid for cleaning tile floors, etc.), causing localized corrosion.
Fourth, in the polluted air (such as the atmosphere containing a large amount of sulfides, carbon oxides, nitrogen oxides), in the event of condensation, the formation of sulfuric acid, nitric acid, acetic acid liquid, causing chemical corrosion.
How stainless steel doors should be maintained and clear rust spots
1. If there is rust on the surface, it can be cleaned with a concentration of 10% nitric acid, or a special maintenance fluid can be used. As long as we use the right maintenance method, we can extend the service life of stainless steel and keep the door clean, bright and gorgeous.
2. When cleaning dirt or dirt on stainless steel door surfaces, use soap, weak detergent, or warm water. The surface of the stainless steel door with bleach and all kinds of acidic stains should be cleaned immediately with clean water and then immersed in ammonia solution or neutral carbonated soda solution.
3. When cleaning the stainless steel door, use detergents, steel balls, grinding tools, etc. that contain bleaching ingredients and abrasives. Remove the washing liquid and wash it with clean water after washing.
4. There is rainbow pattern on the surface of stainless steel, which is usually caused by excessive use of detergent or oil. It can be washed with warm water and neutral detergent when washing.
5. The stainless steel door in the kitchen is easily contaminated with grease, oil, and lubricating oil. It can be wiped clean with a soft cloth and then cleaned with a neutral detergent or ammonia solution.
Summary: The above is the content of the stainless steel door that Xiaobian introduces for everyone, why it will “rust†and the installation method of the stainless steel door. Hopefully it can help you effectively. For more information, please pay attention to this website.
Stainless Steel Door Construction Installation Curtain Installation Method Heating Installation Hydroelectric Installation
3D LED Bulb is widely used in dj lighitng, disco lighting, club lighting, resturant lighting, theme resturant lighting and park decoration lighting. We call the rgb led bulb in different name for different led lighting application, like dj ball, ball 3d, disco ball light bulb, club led bulb, etc
The 3D LED Bulb can be for indoor and outdoor. We cooperate with other famous design organizations to make a big improvement on LED 3D control technology, and developed many 3D visual products, like the ball string(40mm 3D LED Ball string, 50mm 3D led ball string), and the big Magic LED Ball with different size,. The 3D balls control mainly by DMX 512 protocol, and easy to built the led lighting system.
Suppor DMX512 control, address can be manually and automatically set, long transmitting distance of signal and strong anti-interference.
3D LED Bulb Built-in high precision constant current driver IC, LED luminous efficiency is good and uniform color.
Apply superior quality high brightness SMD5050 led, red, green, blue, white and other colors can be chosen.
Apply more efficient DC to DC power supply manage disign, energy saving can reach 40%.
Adopt environmentally friendly materials, no glare, no noisy. Solid capacitor design, lifespan is longer.
Potting glue craft, waterproof level is superior, and can reach IP65.
Photo show of 3D LED Bulb:
3D Led Bulb,Disco Ball Light Bulb,3D Light Led Bulb,3D Led Filament Bulb
Shenzhen Iseeled Technology Co., Ltd. , https://www.iseeledlight.com