There are so many things to use when decorating a house, just like the gypsum line machine we said, because the plaster line must be done when decorating the house, so there is a plaster line machine, but for such things We are not so understanding, the following small series of decoration home network to introduce to you, what are the gypsum line machinery and equipment, and the gypsum line decoration what are the points we need to master.
First, plaster line machine equipment
1. Paste hollow wallboard production line equipment, including movable mixing mixing equipment and crane unit, self-propelled electronically controlled tube core-pulling machine and wallboard forming mold car. The forming mold car consists of two side plates and a middle partition plate. a mold cavity, two side plates are mounted with a rotating arm, and the rotating arm is connected with a rotating shaft on the bottom frame of the mold, and the rotating arm is also connected with the bottom groove of the mold through a pull rod, and the clutch and the reducer drive the clutch to be connected with the set on the mold bottom plate. The telescopic opening and closing mechanism realizes the electric opening and closing of the mold.
2. The molding machine of the production line equipment is formed in one piece at a time, and can be equipped with multiple wallboard molds according to the production volume for cycle production, which greatly improves the production speed and working efficiency of the wallboard, adopts automatic delay core pulling, eliminates human factors. The instability caused by product quality ensures the consistent quality of the products. It is more automated than the existing gypsum wallboard production line equipment, the production line equipment is concentrated, the production workshop area is small, and the operation is simple.
Second, the main points of plaster line decoration
1. Only the basic treatment level is the important premise for ensuring the construction of the plaster line. How to achieve the standard? First, the wall must be checked with the ruler. After the repair, the top surface of the wall has been scraped twice, and the surface is smooth. Protruding or recessing the part, only to do this can guarantee the early quality of the later plaster line construction. Gypsum line construction sequence: Firstly, the construction front should be started from the front. Only by doing so can the front joint be less, and less than half of this kind can be placed in the inconspicuous part.
2. Plaster line repair, this requires the painter to complete, after the plaster line is finished, the painter repairs the joint of the plaster line again to make the joint part fade, so that it is difficult to find, and then repair the top surface of the wall. Ensure that the width of the plaster line is consistent. Brush the latex paint, the normal practice once again primer the paint twice, under the supervision of the workers under construction, many workers are only brushing the topcoat twice, the consistency of the paint should meet the construction instructions, too thin and easy to fall, The surface of the paint that is too thick is poor in fluidity and the surface is not flat.
3. The corners and joints are the top priority of the construction. The dry and dry floats are not beautiful. It can be easily found from this point. Usually, the plaster joints must be scraped and then docked. When docking, pay attention to whether the patterns are correct. Positive, high and low is consistent enough, followed by the plaster line as a whole, one line can not suddenly come out and follow the wall, the lower part needs to be plastered straight, then use the clean water to clean the plaster surface of the plaster line, so as not to be late Clean up.
When making gypsum line, gypsum machine must be used, but we also need to understand the things related to gypsum line, then what are the equipment and decoration points of gypsum line machine, I think everyone through the introduction of the above small series for these I also know about it, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.
Pull Out Kitchen Faucet,Pull Out Sink Faucet,Brass Kitchen Mixer,Chrome Pull Out Kitchen Faucet
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucets.com