What are the details that need to be taken into account when commissioning broken aluminum door and window equipment?

Under the influence of China's rapid economic development, competition in all walks of life has not been muted. We have a strict foothold in the market for door and window equipment and we strictly control equipment quality. So that each factory equipment is perfect, and bring greater economic benefits to the business, Fenggong CNC company has many years of production experience in technology, quality assurance, in order to improve the equipment, so the company seized every production Details, all factory equipment must be successfully debugged before shipment, so Fenggong Xiaobian recommend to everyone under the broken bridge aluminum doors and windows equipment debugging, the need to pay attention to some of the details, hope to see more people have reward!

Debug 1: Power, usually the normal voltage of the door and window equipment is 380V, frequency 50HZ, the front of the equipment and the zero line connection, easy to cause trouble, so when checking the power, pay more attention to the connection between the front and the neutral line is normal, usually manufacturers Both the front and the neutral lines will be identified by color, the black line or blue line will be used in front, and the red line will be used for the neutral line. If the line is reversed, the device will not be able to start up, so you can check whether the line is connected normally during debugging.

Commissioning II: gas supply, door and window equipment, air supply and air pressure have a fixed parameter request, air supply needs to reach 0.3, air pressure needs to reach 8, the pressure must ensure that a certain amount of air supply, in order to achieve cylinder compression, Therefore, when testing the gas supply, it is necessary to check whether the gas supply amount and the gas pressure value meet the required standards. If the door and window equipment is used for a long time, some gas storage tanks need to be prepared. If the atmospheric pressure is not reached, the precision of the door and window processing equipment Degree will have some influence, the processing effect is not good, so when debugging, pay attention to check whether the gas supply is qualified.

Debugging three: equipment, door and window equipment debugging, you need to coordinate each area, to grasp the details of each part, broken bridge aluminum doors and windows of many types, a variety of types, so in the manufacture and debugging of doors and windows equipment, serious, careful, It is the greatest achievement of our front-end CNC company to do a good job of every equipment and bring better benefits to every customer.

Roller Shutter Door

Roller shutter door , also known as "shutter door", lots of panel pieces connected together, fixed in the guide rail , take above reel as the center of rotation.

Roller shutter door is used for commercial facades, garages, shopping malls, hospitals, factories and mines and other public places or residential.Electric roller shutter door, especially for large openings, inconvenient to install the ground door , quick opening effect. Such as for the garage door, shopping mall fire shutter door.

Opening methods: Handing driving mode

Rope driving mode

Remote control driving mode

Electric switch driving mode

Roller Shutter Door,Galvanized Roller Shutter Door,Aluminum Roller Shutter Door,Transparent Roller Shutter Door

Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hfautodoors.com