Gear oil inspection and maintenance methods: Regardless of the type of machinery, different lubricants are prohibited from mixing with each other, reducer is no exception. The gearbox for the oil level screw plug, drain plug and aerator position has its installation location decision. For reducer, the use of oil inspection and maintenance should consider the following aspects: ⑴ oil level check cut off the power to prevent electric shock! Waiting for reducer cooling; remove the oil level plug to check whether the oil is full; installation Oil level plug. ⑵ oil inspection cut off the power to prevent electric shock! Wait for reducer cooling; open the drain plug, take the oil sample; check the oil viscosity index - if the oil is obviously cloudy, it is recommended to replace as soon as possible; - check the oil level, the eligibility - install the oil level screw ⑶ oil replacement After cooling the viscosity of the oil increases oil drain difficulties, reducer should be at operating temperature oil change. Turn off the power to prevent electric shock! Wait for the gearbox to cool down until there is no danger of burning! Caution: The gearbox should still be warm while changing the oil. Put a drain pan under the drain plug. Open the oil level plug, aerator and drain plug. Remove all oil. Install drain plug. Into the same brand of new oil. The amount of oil should be consistent with the installation location. Check the oil level at the plug. Tighten the oil plug and breather.
Nylon Scouring Pad,Nylon Green Scouring Pad,Abrasive Scouring Pads,Industry Scouring Pad
Foshan Nate Abrasive Science & Technology Co.,Ltd , https://www.nateabrasives.com