Threaded clamp technology for the automotive industry (2)

Emuge-Franken is a group company that provides cutting-edge technology in the fields of threading, milling, workpiece fixtures and precision measuring tools. After nearly 90 years of long-term practice, it not only has the common two types of fixtures. The system, in combination with the customer's practical application, successfully developed a mechanical fixture system based on sawtooth thread technology, referred to as the SG system (see Figures 5 and 6).



Figure 5 unclamped state



Figure 6 clamping state

In general, the conical expansion system has a good clamping effect and is suitable for some products with high tolerance accuracy. The workpiece has a relatively large diameter and a short length of the workpiece, but due to its tapered surface, there are certain limitations on the clamping of some workpieces. For example, if the long workpiece is clamped, the middle portion of the expansion sleeve is difficult to be in close contact with the workpiece, and the clamping force is not easy to occur during processing, and the cooperation of the two tapered surfaces is difficult to ensure complete matching. If the base cone has a certain degree of wear or machining accuracy error, when the expansion sleeve and the base cone are matched and the expansion sleeve is in the expansion, only one point is in contact, which will produce a yaw of the expansion sleeve, resulting in the workpiece being clamped. Poor force during processing affects accuracy. (See Figure 7)




Figure 7 Comparison of a general mechanical cone-up system and a SG-threaded mechanical system

Compared with the SG system, in any case, it can ensure that the expansion sleeve and the foundation shaft have sufficient contact and stress points.

Compared with the hydraulic system, the hydraulic type has very good clamping precision, but it is limited by the clamping dimensional tolerance. As shown in Fig. 8, in general, the clamping diameter of 100mm is taken as an example, and the SG system can satisfy. The clamping dimensional tolerance is more than 3 times that of the hydraulic system. The SG system can meet more clamping requirements and processes.



Figure 8 Differences in the range of clamping dimensional tolerances between the hydraulic system and the SG system

In comparison, Emuge's SG system has a good clamping strength, can transfer enough torque for processing, and better wear resistance. And the changeability is also very good, just like screwing the nut, simply screw in, it is not affected by the basic shaft thread, even in the worn state does not affect the expansion of the sleeve. At present, such SG systems have been widely used in various types of fixture products, most of which are used for processing in the automotive industry, such as hobbing, gear grinding and high speed honing of automobile gears.

Previous page

Marijuana Grow Lights

Advantages of LED Grow Light for Marijuana


Long lifetime

Recommended useful lifetime of 50, 000 hours for LED lights the equivalent of
burning a light for 18 hours A day, 365 days a year for seven years and seven months.

Energy efficient

Save 70~85% on power than HID lighting, no need extra blowers and Air conditioning systems for cooling.

Better for plant growth

Plants can use nearly all of the light emitted from LED Lights.
Only about 35% of the light generated by metal halide lamps is useful for plant growth.

Low heat output

LED lights produce very little heat.thermalelectric separation technology and modular fans can control the generated heat amount to be a very low extent.


Features
Deep penetration : Good lighting penetration , can penetrate to the deep of the plants
Modular Internal Build: Fully upgradable, easy warranties
Thermal Management: Custom copper core heatsinks quickly dissipates heat for cool operating temperatures
Powerful: 2nd Generation ultra penetration 5W LEDs light deep into the canopy
Versatile: Power cord available in 85~265V and international plugs
Lighter weight: Much lighter than the same products in the marketplace, safer for hanging .
Plants: Suitable for both vegetative phrase and flowering phrase


Item Display


Marijuana Grow Lights


Marijuana Grow Lights

What is Full spectrum led chip ?

It is the newest trend for indoor plants. Advanced LED Grow Lights chip,not provide sigle color ,provide broad spectrum 400nm~840nm,simialr with sun light ,but most is red and blue,it is best for plant grow.This is a revolutionary step for Grow light which have previously been unable to act as the sole light source for the indoor garden.Suitable for all stages of plant growth.


Marijuana Grow Lights

Advtanges:

Upgraded Epistar chips,High Lumen,High penetration.

Zener Diode protection Each LED,one LED Out,other LEDs still work.
High quality material,Listed Certification Wires,Heatproof Tube,Zero-Risk to catch fire.
Efficient Full spectrum Special rations of Blue,Red and White for both blooming &fruiting stages.
Adopting isolated power supply,safe&easy to maintain&long life time.
Aluminum heat-conducting plate+high quality brand fans,efficient heat dissipation.
IR LED involved,it is not as bright as other leds,But promote the yield.

Plug with listed certificate safe to use.

Marijuana Grow Lights

The Plug you can choose

Warehouse Grow Light

Ageing Test

Marijuana Grow Lights


Our Quality Control systems

Marijuana Grow Lights


Package

Marijuana Grow Lights

Marijuana Grow Lights


Application: Greenhouse, Hydroponics, Aeroponics, Home Garden, Farm, Vegetable Shed, Botanic Garden, Flower Exhibitions, Horticulture, Hydroponics, Hemp Cultivations , Medical Plants Cultivations, etc.


Marijuana Grow Lights


Warnings:

1.lndoor use only.

2.To avoid being damaged,do not use water or drip irrigation while using.

3.Sunshine lighting time should be 12-18 hours.

4.While irradiating the plants,the height of led grow lamp is not less than 10 inches,

low height will cause the destruction of plants.

5.Highly hang the lamp will weaken the energy and affect the growth cycle of the

plants, so the lamp should not be hung too high.

6.While taking care of the plants, please spray the leaves and branches 2-3 times everyday,

to ensure the the plants do not wrinkle a wither, and have no phenomenon of few fruit, and

hard pericarp.


Our Company

Marijuana Grow Lights

Marijuana Grow Lights


Trade Terms

Payment: T/T, L/C, Paypal, 30% deposits before production, 70% balance to be paid before deliverying(Western Union are welcome)

Sample will be delivered within 7 working days.

Discounts are offered based on order quanlityes.

MOQ:sample order are acceptable

Delivery ways:DHL,UPS,FedEx,TNT, door to door,by sea,by air,etc.


Professional dedicated to Research, Development, Design, Manufacture of Innovative, Intelligent control and high efficiency LED grow lighting for modern agriculture,Marijuana,greenhouse,hydroponics, etc.

Large Capacity Led Grow Light,Led Grow Light For Plant Growing,Led Plant Grow Light,Cob Led Plant Grow Light

Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlighting.com