In home decoration, tiles are an important part of the floor materials and are widely used in kitchens, living rooms, and bathrooms. Because the functions of these places are different, they must be selected when choosing tiles.
Nobel Tiles
The living room is more decorative and is the place where the taste of home is displayed. It is also the place where most family gatherings are held. Therefore, besides practicality, the tiles of the living room are also very important for decoration. At present, some mosaic tiles and simple antique tiles on the market are good choices.
There are more cooking fumes in the kitchen, so choose kitchen tiles to be easy to clean. Practical smooth glazed tiles are very easy to clean. The kitchen floor tiles are best made of matte surfaces to prevent people from slipping when there is water on the tiles.
Bathroom tiles should be mainly non-slippery. General matt or shallow convex floor tiles are more suitable for bathroom use. Compared with the kitchen, the wall of the bathroom will not produce too many stains that are difficult to remove. The matte tiles are sufficient to meet the needs.
Links: Build a Wonderful Home with Tiles 10 Home Kitchen Tiles Recommended
Tiles Home Decoration Home Decor Bathroom Decoration Living Room Floor Tiles Antique Tiles Bathroom Tiles Bathroom Floor Tiles Kitchen Tiles Decoration Home
Plate rolling is a process of continuous three-point bending of sheet metal using a plate rolling machine. The equipment puts the sheet material between the upper and lower work rolls when rolling. The upper roller is raised and lowered vertically, and the two lower rollers rotate and move horizontally relative to the axis of the upper roller. When the upper roll descends, the plate is plastically deformed and bent between the upper and lower work rolls. The continuous rotation of the bottom roller drives the steel plate to advance and retreat through the friction between the plate and the roller to complete the coiling.
1. Pre-bending. When the plate is rolled, there is a length at both ends of the plate that does not bend because it does not touch the upper roller. It is called the remaining straight edge. In the process, the minimum force arm at which the plate starts to bend is called the theoretical remaining straight edge. The bending form (symmetrical bending, asymmetrical bending) is related.
2. Centering. The purpose of centering is to make the generatrix of the workpiece parallel to the roller axis to prevent skew.
3. Roll round. Rolling is the main process of product forming, which is divided into two types: one-time feed and multiple feeds. Multiple feeds are commonly used for rolling thick plates. The number of feeds depends on the technological constraints (such as the maximum allowable deformation during cold rolling) and equipment constraints (such as non-slip conditions and power conditions). When the rebound of the cold coil is significant, a certain amount of overcoiling must be added.
4. Straightening round. The purpose of rounding is to make the curvature of the entire circle as uniform as possible to ensure product quality. The general rounding process is divided into three steps:
(1) Load: According to experience or calculation, adjust the work roll to the position of the required maximum correction curvature.
(2) Rounding: Roll the roller 1 to 2 turns under the corrected curvature to make the entire curling rate uniform.
(3) Unloading: gradually unload the load, so that the workpiece is rolled several times under the gradually reduced correction load.
Rolling Machine,Three-Roller Bending Machine,Four-Roller Bending Machine,Roll Forming Machine
Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaous.com