Stainless steel sink maintenance tips how to deal with common problems

The sink you just bought is always light and pleasing. Can not be used for as long as it has become another appearance, water stains, rust, mold ... ... how to wipe people feel dirty, worn out. How is this going? In fact, the sink maintenance must master certain skills to make the sink last forever!

Brand shop: Olean sink

Sink part: What if "float embroidering" and "mold stain" appear?

Cause of A:

1 When the kitchen is renovated, welding chips, cement, oil, etc. remain on the surface of the sink. Failure to clean it in time may cause rust and mold.

2 In many parts of China, water quality is poor, and most of the water pipes are galvanized pipes. The contents of iron and other elements in the water are high. After the water tank is used, if there are more water stains, the iron in the water will rust, especially the renovation of new houses. If the long-term residual water in the water pipe leaves water stains on the sink and is not cleaned in time, it can easily cause "float embroidering";

3 Occasionally, in the newly renovated house, the presence of mineral or acid and alkaline dust falling on the surface of the sink may cause “float embroidering”;

4 Steel knives, scissors, bottle openers and other steel objects are placed on the surface of the sink for a long period of time and can cause “float embroidering”, mold, or discoloration;

5 Chemicals, cleaning agents, paints, sauces, oil stains, etc. remain in the water tank. Over time, it can cause mildew to stick to the surface of the sink.

B Prevention and treatment:

1) When the kitchen is renovated, the sink is finally installed. Before installation, the long-term residual water in the water pipe is drained. After installation, the water tank is thoroughly rinsed;

2) Clean the sink after each use of the sink, leaving no dirt or water stains;

3) Do not leave the kitchen knife, bottle opener, etc. in the sink for a long time, and do not scrub the sink with steel wire balls in particular;

4) In the event of "float embroidering" or "mold stains", apply toothpaste to the rust spots and spots and scrub them with a scrubbing cloth.

Sink entrance decoration house cement house renovation new house paint

2 Hole Basin Faucet

2 Hole Basin Faucet,Wall Mounted Faucet,2 Hole Basin Mixer,2 Hole Basin Mixer Tap

Heshan Jasupi Sanitary Ware , https://www.jasupifaucets.com