Three points design seven points construction ———
The owner, Lu Yong, will record the decoration process of his home and share with you the hardships, lessons learned and experience gained.
After the signing of the renovation contract, the next step is to enter the construction phase. Many people say that this is the beginning of the "tough battle." "Three-point design seven points decoration", this is even a designer will not deny an argument. There is no rigorous implementation of a good decoration team, careful construction, and clever, perfect design is no good.
â— Look at the construction site to understand the construction process
When looking for a decoration company at the beginning, every company will follow me with a great deal to show how advanced their technology is and how rigorous the process is, but what I believe is what we believe to be.
Nowadays, the decoration company will basically have a shuttle bus to the construction sites on weekends, allowing customers to go to the site to “checkâ€. However, it can be imagined that the decoration company is willing to bring the site to be visited by everyone. It must be the best foreman and the best construction team below. The quality of the project is naturally top-notch. Therefore, the most effective way is for the designer to help recommend a few foremen, or to find out which team has a good reputation among other customers who have been renovated in this company. Afterwards, we must focus on understanding these issues for us. More reliable construction team engineering quality.
Since I'm almost a complete layman of engineering, it is actually a hearsay about how to judge the level of a construction team. For example, bricklayers should pay special attention to tiles. Tiles may seem like a simple task. However, if you want to do a good job, it is absolutely a terrific skill. For another example, if the wall surface is handled well, you can't just look at the naked eye. It's best to Take a table lamp or emergency light on the wall, and then from the side to see if the paint is not evenly coated, there is no obvious flaws; there are ceilings, in particular, should pay attention to the joints in the corner, and so on.
â— The best step in the end
After a visit to the foreman and the team, I finally selected a team that was more satisfying to me. The captain surnamed Li, who is very clever and very talkative, and he and my designer Iowa had previously cooperated, should be said to understand each other, have the basis for working together. So, I had a good time with Iowa. I came to the bottom of my house on Wednesday and officially started the work on Saturday.
The work is very important, although it is nominally the designer to hand over the design proposal to the construction team on the ground. However, in fact, because the designer's renderings are somewhat "on paper", they arrived at the scene and were handed to the construction team. More or less, there will be some changes.
My family will inevitably have such design changes. The most important thing is still the bathroom part that I want to change. Since there are two walls that are not on a horizontal line, you need to build a dice about 10 cm on one side of the wall or simply change the kitchen to open. In addition to this, the demolition space also involves two sets of heating shifts, and this work is my company can not complete the decoration, but also need me to contact HVAC company to solve this problem. And so on, and how the home theater I ordered recently reserved lines and how to wire the surround speakers in advance; the water pipes used in my home area are PER-T pipes, and we are looking for the right company to transform this special material pipe; The cabinet designer comes to the door to measure the design, explain the location of the reserved power supply, and so on. In short, at the end of the handover, it is best to deal with the renovation of the area together, to account for the construction team to the construction team, to avoid half of the post-project, suddenly remembered which part is missing, but also Rework.
â— Watching the foreman guide to make unnecessary additions
At the end of the handover, Iowa and the project manager were withdrawn, and Mr. Li told me about other things. For example, the walls of the entire bathroom must be fully covered with water, and the water resistance of the cloakroom and the kitchen should also be 1.2 meters above the wall. It is said that this is more standardized and reduces hidden dangers in the future. It also says that some owners require the entire house to be made. Waterproof. I stayed with my eyes and did not immediately agree with Mr. Li’s suggestion.
On the way home, I went to find Aohua and told her about it. She told me that there is no need to waterproof the cloakroom, and the significance of the kitchen is not great. The key is that the bathroom must be done well, the shower area must be brushed to the top, and other parts, in addition to the ground to be waterproof, other places Just curl up 40 centimeters. As far as the other spaces in the house, such as the living room and the bedroom, do not make much sense for waterproofing. This I realized that in order to make more money and make more money, construction workers will always advise the owners to add more items. In this case, the best way is to find a designer, or directly to the project manager, and they appear to coordinate. Iowa told me "The designer's job can be more than just design. I will be responsible to you if the decoration is not completed."
Villa Design Entrance Decoration Decoration Design House Decoration House Space Home Improvement Decoration Ceiling Effect Drawing Decoration Decoration Company Decoration Home Living Room House Decoration Effect Picture Home Kitchen Cabinet Door Kitchen Cabinet Door Bathroom Design Toilet Waterproof Toilet Ceiling Bathroom Tile Toilet Door Cloakroom Effect Picture Bedroom Lamp Kitchen Small tile bedroom
Ferroalloys, a broadly defined ferroalloy is a product that is used as a deoxidizer, elemental additive, etc. in steelmaking to add iron to certain properties or to meet certain requirements.
Property: The main element of the ferroalloy generally has a high melting point, or its oxide is difficult to reduce, and it is difficult to refine the pure metal. If it is together with the iron, it is easier to reduce the smelting. The use of ferroalloys in iron and steel smelting, in which iron is not only harmless, but because of the fusing of molten steel is more favorable. Therefore, deoxidation and alloying in the steelmaking process are mostly added in the form of iron alloys. Iron alloys are generally brittle and cannot be used as metal materials.
Purpose: As a deoxidizer for steelmaking, silicon manganese, ferromanganese and ferrosilicon are the most widely used . As strong deoxidizers, aluminum (aluminum iron), silicon calcium, silicon zirconium, etc are used . Commonly used alloy additives are: ferromanganese, ferrochromium, ferrosilicon, ferrotungsten, ferromolybdenum, ferrovanadium, ferrotitanium, ferronickel, niobium (neodymium) iron, rare earth iron alloy, ferroboron, ferrophosphorus and so on. A variety of ferroalloys, in accordance with steelmaking needs, are regulated in many grades based on the content of alloying elements or the level of Carbon contained, and the impurity content is strictly limited. Ferroalloys containing two or more alloying elements are called composite ferroalloys. The use of such ferroalloys can add deoxidizing or alloying elements at the same time, which is beneficial to the steelmaking process and enables the more comprehensive and efficient utilization of symbiotic ore resources. Commonly used: manganese silicon, silicon calcium, silicon zirconium, silicon manganese aluminum, silicon manganese calcium and rare earth ferrosilicon.
Ferroalloys
Ferroalloys,Ferro Silicon,Ferro Tungsten,Different Shape Ferroalloys
Hwa Seng Resources (Hong Kong) Co., Limited , http://www.hwaseng-resources.com