First, the gussets are heavy and not thick. Many merchants use the thickness of the pinch plate as a reason for selling high prices, but everyone does not know that the level of the aluminum pinch plate has nothing to do with the thickness, but depends entirely on the material. According to Mr. Tian, ​​a developer of celebrity integrated ceiling technology, there are three types of aluminum lining materials available on the market, from low-end to high-end, which are laminated, roll-coated, and oxidized plates. The inferior aluminum gussets are not only unable to be thin, but also easily peel off. .
Second, the auxiliary material "only gold" is the most critical. Customers misunderstood under some businesses often only pay attention to the appearance part and ignore the internal installation framework. This part of the auxiliary material is equivalent to the foundation and pillars of the building. Cutting corners and corners can easily cause the ceiling to sink or even fall. The celebrities promised that the framework of "the only gold structure is not deformed for 50 years," with high-quality steel brushed gold corrosion layer, and pieces of anti-counterfeit stamping, to facilitate consumer identification.
Third, electrical appliances are very important. The accidents such as explosions of heating lamps and wind-heating caused constant fire, all of which are attributed to poor manufacturers' use of inferior electrical appliances to put together low-priced products. Integrated ceiling, electrical appliances is the "core", so the brand-name electrical appliances to launch the most reliable products, such as celebrities on the heating lamp "6 protection", ventilation "5 breakthroughs", lighting "four characteristics" as a commitment.
Fourth, design and installation should be professional. Integrated ceiling, seven-point installation of three minutes. According to the introduction of celebrity service personnel, the front-line staff of the big brands have passed the qualification review of design and installation. Therefore, as long as the trusted brands are selected in the formal channels, consumers can avoid the worries.
The mechanical transmission device in the reciprocating movement of the more, will lead to very large abrasion of random cable. Nylon drag chain (Nylon Cable Drag Chain) is one of the most important in the facilities in the operation of the complete protection to the cable, and can supply after mechanical traction.
Nylon Drag Chain (Nylon Cable Drag Chain), has the high pressure and tensile load, good toughness and high elasticity and abrasion resistance, flame retardant, high and low temperature performance is stable, can be used in outdoor. The use of nylon content decided to Drag Chain strength and wear resistance as well as the running noise size.
Nylon drag chains (Nylon cable drag chain) are resistance to oil, salt, and have certain ability of acid and alkali resistance.
Nylon drag chain (Nylon cable drag chain) inspection method:
1. Make the nylon drag chain (Nylon cable drag chain) against the sun, If you can see the reflected light even without astigmatism, then the drag chain materials evenly, the quality is good.
2. Touch each edges and the surface of nylon drag chain (Nylon cable drag chain), if you don't prick the hand and feeling smooth, you can determine the production with minimal error range of mould.
3. Rub the surface of the nylon drag chain (Nylon cable drag chain) with wood, if the drag chain surface soon appeared pits, and there are the shape of clastic makings falls off, we can judge the raw material of nylon drag chain (Nylon cable drag chain) with poor quality. If you feel very difficult when rub drag chain, pits appeared and falling debris in short filaments, we can determine the raw materials of the nylon drag chain (nylon cable drag chain) joined the high strength material such as glass fiber, which make its wear resistance is higher.
Raw materials are fundamental in determining the quality of engineering plastic drag chain ((plastic cable drag chain)), so the quality of raw materials is a key point. At the time of manufacture, we choose the original package materials as raw materials and can`t add recycling of used materials. This will increase the drag chain itself toughness, reduce the damage caused by low temperature, and reduce the emergence of the problem.
1. XDTLF25 Nylon Drag Chain (XDTLF25 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
25*25 |
40*45 |
50/ 65/ 75/ 100/ 125 |
50 |
3.6 |
4piece Both lids can be opened Bridge type Totally enclosed |
25 |
25*38 |
40*58 |
38 |
||||
25*50 |
40*70 |
50 |
||||
25*57 |
40*77 |
57 |
||||
25*60 |
40*80 |
60 |
||||
25*70 |
40*90 |
70 |
||||
25*75 |
40*95 |
75 |
||||
25*80 |
40*100 |
80 |
||||
25*100 |
40*120 |
100 |
||||
25*125 |
40*145 |
125 |
2. XDTLX25 Nylon Drag Chain (XDTLX25 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
25*25 |
40*45 |
50/ 65/ 75/ 100/ 125 |
50 |
2.6 |
4piece Both lids can be opened Bridge type Totally enclosed |
25 |
25*38 |
40*58 |
38 |
||||
25*50 |
40*70 |
50 |
||||
25*57 |
40*77 |
57 |
||||
25*60 |
40*80 |
60 |
||||
25*70 |
40*90 |
70 |
||||
25*75 |
40*95 |
75 |
||||
28*80 |
40*100 |
80 |
||||
25*100 |
40*120 |
100 |
||||
25*125 |
40*145 |
125 |
3. XDTLF30 Nylon Drag Chain (XDTLF30 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
30*38 |
45*50 |
55/ 65/ 75/ 100/ 125
|
50 |
3.1 |
4piece Bridge type Totally enclosed |
38 |
30*50 |
45*70 |
50 |
||||
30*57 |
45*75 |
57 |
||||
30*60 |
45*80 |
60 |
||||
30*70 |
45*90 |
70 |
||||
30*75 |
45*95 |
75 |
||||
30*80 |
45*100 |
80 |
||||
30*100 |
45*125 |
100 |
||||
30*125 |
45*150 |
125 |
4. XDTLX30 Nylon Drag Chain (XDTLX30 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
30*38 |
45*50 |
55/ 65/ 75/ 100/ 125
|
50 |
3.1 |
4piece Bridge type Totally enclosed |
38 |
30*50 |
45*70 |
50 |
||||
30*57 |
45*75 |
57 |
||||
30*60 |
45*80 |
60 |
||||
30*70 |
45*90 |
70 |
||||
30*75 |
45*95 |
75 |
||||
30*80 |
45*100 |
80 |
||||
30*100 |
45*125 |
100 |
||||
30*125 |
45*150 |
125 |
5. XDTLF25×30 .XDTLF30×30 Nylon Drag Chain (XDTLF25×30 .XDTLF30×30 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
25*30 |
40*50 |
55/ 65/ 75 |
50 |
3.5 |
4piece Totally enclosed |
30 |
30*30 |
40*50 |
30 |
6. XDTLF35 Nylon Drag Chain (XDTLF35 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
35*38 |
50*61 |
75/ 100/ 125/ 150
|
60 |
5 |
4piece Bridge type Totally enclosed |
38 |
35*50 |
50*73 |
5 |
50 |
|||
35*57 |
50*80 |
5 |
57 |
|||
35*60 |
50*83 |
4 |
60 |
|||
35*70 |
50*93 |
4 |
70 |
|||
35*75 |
50*98 |
4 |
75 |
|||
35*80 |
50*103 |
3.5 |
80 |
|||
35*100 |
50*125 |
3.5 |
100 |
|||
35*125 |
50*150 |
3 |
125 |
7. XDTLX35 Nylon Drag Chain (XDTLX35 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
35*50 |
55*75 |
75/ 100/ 125/ 150
|
66 |
5 |
4piece Bridge type Totally enclosed |
50 |
35*75 |
55*100 |
75 |
||||
35*100 |
55*125 |
4 |
100 |
|||
35*125 |
55*150 |
125 |
||||
35*150 |
55*175 |
150 |
||||
35*175 |
55*200 |
175 |
||||
35*200 |
55*225 |
200 |
8. XDTLF45 Nylon Drag Chain (XDTLF45 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
45*75 |
70*105 |
100/ 125/ 150/ 200 |
70 |
5 |
4piece Bridge type Totally enclosed |
75 |
45*100 |
70*130 |
5 |
100 |
|||
45*115 |
70*145 |
4 |
115 |
|||
45*125 |
70*155 |
4 |
125 |
|||
45*150 |
70*180 |
4 |
150 |
|||
45*175 |
70*205 |
3 |
175 |
|||
45*200 |
70*230 |
3 |
200 |
9. XDTLX45 Nylon Drag Chain (XDTLX45 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
45*50 |
62*78 |
75/ 100/ 125/ 150 |
70 |
5.5 |
4piece Bridge type Totally enclosed |
50 |
45*75 |
62*103 |
75 |
||||
45*100 |
62*128 |
4.5 |
100 |
|||
45*125 |
62*153 |
125 |
||||
45*150 |
62*178 |
150 |
||||
45*175 |
62*203 |
175 |
||||
45*200 |
62*228 |
200 |
10. XDTLF56 Nylon Drag Chain (XDTLF56 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
56*75 |
80*107 |
150/ 200/ 250/ 300 |
100 |
6 |
4piece Bridge type Totally enclosed |
75 |
56*100 |
80*132 |
6 |
100 |
|||
56*125 |
80*157 |
6 |
125 |
|||
56*150 |
80*180 |
5 |
150 |
|||
56*175 |
80*207 |
5 |
175 |
|||
56*200 |
80*232 |
5 |
200 |
|||
56*250 |
80*282 |
4 |
250 |
|||
56*300 |
80*332 |
4 |
300 |
11. XDTLF65 Nylon Drag Chain (XDTLF65 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
65*75 |
90*110 |
150/ 200/ 250/ 300/ 350 |
100 |
6 |
4piece Bridge type Totally enclosed |
75 |
65*100 |
90*135 |
6 |
100 |
|||
65*125 |
90*160 |
6 |
125 |
|||
65*150 |
90*185 |
6 |
150 |
|||
65*175 |
90*210 |
5 |
175 |
|||
65*200 |
90*235 |
5 |
200 |
|||
65*250 |
90*285 |
5 |
250 |
|||
65*300 |
90*335 |
4 |
300 |
12. XDTLF80 Nylon Drag Chain (XDTLF80 Nylon Cable Drag Chain)
Provide the parameters: Quantity (pc.), length of the chain, width of the chain, bending radius, height of the chain
Inside Diameter (height*width) (mm) |
Outside Diameter (height*width) (mm) |
Bending radius (mm) |
Pitch (mm) |
Non-support length (mm) |
Type |
Width of the chain (mm) |
80*75 |
108*125 |
200/ 250/ 300/ 350/ 400 |
110 |
8 |
4piece Bridge type Totally enclosed |
75 |
80*100 |
108*150 |
8 |
100 |
|||
80*125 |
108*175 |
8 |
125 |
|||
80*150 |
108*200 |
7 |
150 |
|||
80*175 |
108*225 |
7 |
175 |
|||
80*200 |
108*250 |
7 |
200 |
|||
80*250 |
108*300 |
6 |
250 |
|||
80*300 |
108*350 |
6 |
300 |
Nylon Drag Chain
Nylon Drag Chain,Nylon Cable Drag Chain,Cable Drag Chain,CNC Machine Drag Chain,Protection Cable Drag Chain
HEBEI HANMAC MACHINE CO., LTD. , http://www.chinahanmac.com