1. colour
The color of the toilet and the bathtub and washbasin should be the same, the color should not be deeper than the floor tiles, and the hue should be coordinated with the wall tiles.
2. quality
The glazed surface of the toilet shall be clean and smooth, with no obvious defects in color and crystallinity. There shall be no pinholes and lack of glaze. After the toilet will deliver crisp and sweet sound, no cracking sounds, no cracks, trademarks shall be clear, and various accessories shall be complete. , No deformation, etc.
3. Outlet
When the water outlet of the toilet is under the drainage, the distance from the center of the outlet to the wall behind the tank should be measured. Otherwise, the toilet cannot be installed. The outlet of the horizontal drainage toilet shall be equal to the height of the horizontal outlet, preferably slightly higher, in order to ensure the flow of sewage.
4. Water saving
As water bills gradually increase, water saving performance becomes increasingly important. The size of the water tank does not indicate whether it is water-saving, but whether the design of the flushing and drainage system and the water tank fittings in the toilet seat structure are reasonable and whether the quality passes. General toilets should be marked with the amount of flushing, and the flush volume below 6 liters can be classified as water-saving toilets.
5. Support
Three sets of supporting sanitary ware are required to be provided, and related faucets should also be combined with the bathtub faucet and wash basin faucet. The brand is the same, and the style is the same. If the conditions permit, the towel rack should also be the same type as the faucet.
Bathtub Tile Faucet Bathroom Design Bathroom Wall Tiles Bathroom Washbasin Bathroom Tiles
Clevis&Tongue,Quick Grip Clamps ,Plastic Clamps ,Furniture Clamps
Hardware Accessories Co., Ltd. , http://www.nbhardwares.com