First, the quality of the exterior appearance of decorative tiles:
(1) Is the color of the tiles in the same room the same and whether the edge seams are neat;
(2) whether the tile pattern mosaic is consistent;
(3) Whether the corners and other places that need to be cut are consistent and beautiful;
(4) Tap with a wooden hammer to hear the sound of empty drums;
(5) Using a long ruler to scan the wall surface after paving, whether it is uneven or not;
(6) Whether the gap between stone and tile is filled with dense;
(7) Check whether the tiles have chromatic aberration, cracks, deformation and incompleteness;
(8) Whether the floor drain connection is tight and firm and meets drainage requirements.
Second, the appearance of the quality of the wall paint acceptance check points:
(1) The appearance must not be cracked: it will not appear after the coating is finished, but will be discovered later;
(2) The surface must not be rough: due to the coating itself or due to the unevenness of the base layer;
(3) Surface peeling: layers of wall peeling off, wall surface even exposed base;
(4) The surface of the powder: wipe with a clean cloth, there is a lot of latex powder on the cleaning cloth;
(5) Surface blistering: Some drum kits appear;
(6) Imprints: as the water flows through the remaining imprints;
(7) Brushing: Uneven color in horizontal and vertical, there are obvious brush marks.
Third, the quality of paint coating appearance acceptance check points:
(1) If tempering lacquer is used, the wood background cannot be exposed after painting;
(2) No peeling, no brushing, no traces;
(3) After the paint brush has been tempered, no cracking or formation of fine or coarse lines can occur;
(4) The surface of the paint and varnish cannot be formed into candle-like pendants, brush marks, etc.
(5) The surface of the paint and varnish cannot have wrinkles, and pinholes or round beads are convex;
(6) After the paint and varnish are coated, the surface is delicate, and rough or hard blocks cannot be touched;
(7) After the varnish is applied, the grain should be clear and not turbid;
(8) After the varnish is painted, the color should be bright, and there should be no deep piece of light;
(9) Do not contaminate doors, windows, glass, hardware, and other items.
Fourth, wood flooring assembly appearance quality acceptance points:
(1) After the floor is bought for home, it should be opened and aired to make it suitable for indoor temperature and humidity;
(2) The grass-roots level should be cleaned and well-prevented;
(3) The keel under the wooden floor should be made of dry wood that is not easily deformed, such as fir, pine, etc.;
(4) There are shades of solid wood floors, and the colors should be the same or similar;
(5) Pavement shall be spliced ​​with wooden patterns so that the pattern is uniform and uniform;
(6) The gap between each wooden floor should be tight, the width is less than 0.5mm, the joints should be staggered;
(7) The leveling error of the rear layer of the pavement is less than 1mm, and the level is not tilted;
(8) There is no "click" sound.
Fifth, paste wallpaper appearance quality acceptance points:
(1) Bubbles cannot appear;
(2) Edge corners cannot be edged;
(3) No wrinkles;
(4) No spots and smudges;
(5) Observe the distance from 1.5M, you cannot see a clear patchwork;
(6) The splicing patterns should be symmetrical, and the splicing patterns should be connected.
6. Acceptance points for appearance quality of wooden doors and windows:
(1) Check the material of the doors and windows and the door and window cover, whether the color is consistent, whether it is consistent with their own vision;
(2) Check whether the surface has collision marks and whether the surface is flat and in good condition;
(3) Whether there are defects in the process of painting;
(4) Check whether the side of the door window hole is vertical;
(5) Check whether the door window switch is comfortable;
(6) Push-pull doors and windows will be hindered by the installation of slide rails and should be adjusted in time;
(7) The gap between the wooden door and window and the door and window cabinet should be small, and the larger one should be removed and reinstalled;
(8) Doors and windows hinges, handles, locks and other hardware quality issues must be resolved in a timely manner.
Seven, curtain box appearance quality acceptance points:
(1) The curtain box installation should be firm;
(2) The curtain box should be on the horizontal line.
Three trees paint windows, doors and windows paint interior decoration switch floor tile glass tile glass door tile adhesive floor tile ld tile
Chinese Red Shingle Tile,Chinese Tile Roof,Chinese Ceramic Roof Tiles
Shandong Yahong New Materials Technology Co., Ltd , https://www.okrooftile.com