1. Imported solenoid valve is recommended to use the unit to assign a person to be responsible for, use and maintain. 2, 1-2 times a year of regular maintenance is the best way to ensure reliable operation and longevity of the solenoid valve. The following four conditions inside the solenoid valve are the reasons that hinder the normal operation of the solenoid valve and shorten the life.
Analysis of solenoid valve troubleshooting
1. Imported solenoid valve is recommended to use the unit to assign a person to be responsible for, use and maintain.
2, 1-2 times a year of regular maintenance is the best way to ensure reliable operation and longevity of the solenoid valve. The following four conditions inside the solenoid valve are the reasons that hinder the normal operation of the solenoid valve and shorten the life.
2.1, the medium changes during use http://
2.2, rust inside the takeover
2.3. The oil of the air compressor is oxidized to produce carbon tar and other impurities, and the imported pump is mixed into the pipeline.
2.4 There are dust, dirt and other impurities in the pipeline
3. When the solenoid valve is installed again after being installed or after being deactivated for a long time, it must be tested by the medium for several times. After working normally, it can be used officially.
4. When the steam valve is put into operation again after being deactivated for a long time, the condensed water should be drained and tested several times. After normal operation, it can be put into operation http://.
5. Before the maintenance, the power must be cut off and the medium pressure removed.
6, solenoid valve coil assembly should not be opened http://
7. When cleaning the solenoid valve, use kerosene, trichloroethylene or other solutions, but it should be noted that the rubber parts may melt up, so replace the rubber parts.
8. When disassembling and cleaning, the parts should be placed in order to restore the installation http://.
9. Our company has wearing parts, please indicate according to the instructions when ordering.
10. If the disassembly order, wearing parts and other matters are not understood, please check with the company or local offices for the imported gate valves.
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
A high quality product starts with the good material. Our products are made of brass or stainless steel 304, different kinds of material can meet different market standards. They are healthy, environmental-friendly and durable, perfect for the modern life.
The good quality surface finish make the products look amazing. We use the advanced electroplating technology to make sure the products corrosion resisting, durable and stunning. A lot of different kinds of finishes can be manufactured by our factory, and the customized finish can be manufactured, more options for your modern bathroom or project.
Our products had been exported many countries and areas in the world, such as Australia, United State, Europe, Asia and so on. We have many certification for different countries.
Round Shower Rail,Brass Shower Rail,Round Shower Slider Rail,Stainless Steel Round Shower Rail
KaiPing HuiPu Shower Metalwork Industrial CO,LTD , https://www.hp-shower.com