If you want to extend the equipment for excavating pits, you will need to see how the customers with their digging equipment do maintenance problems. Usually, the pit digging machine for pit trenching is divided into four parts for maintenance. Steps to treat:
1. Store the pole-drilling trench digging machine fully lubricated and store it, and periodically pivot or short-time pole-drilling trencher machine equipment.
2. Tire increases inflation pressure. To change the position of the ground, it is best to leave the ground.
3. Take off the pole pole trenching machine equipment storage battery dedicated storage. Check the electrolyte surface height and specific gravity, store it in full charge, and charge it once a month. Keep the battery surface clean and dry and winter freeze protection.
4. Winter pole digging trenching machine digging machine equipment attention to antifreeze, after the end of the daily operation or to park for a long time, let the engine idle at a small throttle for about 10 minutes, wait for the temperature to drop to about 50 degrees and then let go the cooling water, To prevent freezing the engine. After the multi-cylinder water-cooled engine is to be discharged, the motor is started for 3 to 5 seconds to drain the water in the pump (the engine cannot be operated).
It is of great significance to ensure the smooth construction of the equipment and reduce the cost and cost of maintaining the equipment for trenching and trenching.
1. Store the pole-drilling trench digging machine fully lubricated and store it, and periodically pivot or short-time pole-drilling trencher machine equipment.
2. Tire increases inflation pressure. To change the position of the ground, it is best to leave the ground.
3. Take off the pole pole trenching machine equipment storage battery dedicated storage. Check the electrolyte surface height and specific gravity, store it in full charge, and charge it once a month. Keep the battery surface clean and dry and winter freeze protection.
4. Winter pole digging trenching machine digging machine equipment attention to antifreeze, after the end of the daily operation or to park for a long time, let the engine idle at a small throttle for about 10 minutes, wait for the temperature to drop to about 50 degrees and then let go the cooling water, To prevent freezing the engine. After the multi-cylinder water-cooled engine is to be discharged, the motor is started for 3 to 5 seconds to drain the water in the pump (the engine cannot be operated).
It is of great significance to ensure the smooth construction of the equipment and reduce the cost and cost of maintaining the equipment for trenching and trenching.
End Mill For Graphite Machining
End Mill For Graphite Machining,Carbide End Mills, Sdc Coating Mill,Roughing Milling Cutter
JIANGYIN GOLD STAR INDUSTRY CO.,LTD , https://www.jygoldstarindustry.com