Water treatment equipment is a system. If you are going to install a domestic water treatment system, then after choosing a good service provider and product, don't think that you're done. You need to do a lot of preparation before installing.
1. Be careful when signing a contract
Many owners often do not know what to look for when signing a contract. Generally speaking, there are the following points:
1. To confirm the product's name, model, quantity and unit price;
2. Check if your area belongs to the merchant's free shipping range;
3. Confirm the merchant is free to install;
4. Agreed delivery and installation time.
In addition, deposits are generally required when signing the agreement.
2. Arrange space before installation
Domestic water treatment, especially family central water treatment, generally requires an independent operation space. Its location may be in the operation of the balcony, garage, or special equipment room. The central water purifier and water softener should pay attention to leaving sewage outlets on the nearby ground. And have power. In addition to the requirements for space and power, there is usually water (ground drain); the sewage provides the wastewater discharge during the self-cleaning maintenance of the water treatment equipment.
3. The water pipeline is designed well
The central water treatment equipment is generally installed at the main water supply pipe, before the first water point, so it is generally required to change the original design of the water pipe inside the tap water, first lead the main pipe to the water treatment room, and then according to different water requirements. The water pipe is laid to the corresponding location. According to the distinction between domestic water and drinking water, we generally classify bathroom water (water heaters, shower water, etc.), laundry water, and floor heating water as the first-line pipes, and the water source is softened by a central softener. Kitchen water (also known as inlet water) is used as an independent pipeline, leading from the main pipe to the kitchen room; in addition, the pre-filter and the central water purifier are installed on the home-to-home pipe; the indoor waterway is generally well-repaired. Difficult to change, so it is recommended to do a good job in the initial decoration.
Water purifier water purifier purchase
3mm Green Through-hole LED(DIP LED) manufacturer from China.
In this catalog, we mainly introduce the 3mm Green Through-hole LED.
3mm Through-hole LED, we supply 3mm Green LED with water clear lens, 3mm Green LED with Green clear lens and 3mm Green LED with Green diffused lens, 3mm round green LED without flange(fringe). We also supply 4mm Green LED with water clear lens, 4mm Green LED with Green clear lens and 4mm Green LED with Green diffused lens.
3mm Green Through-hole LED widely used for indicator LED, die hole LED and 3mm round Green with lamp holder because of the high brightness and the small size.
For the pin of 3mm Green through-hole LED, we also have a lots of choice on it. For example: 3mm Green Through-hole LED flat pin, 3mm Green Through-hole LED curved pin, 3mm Green Through-hole LED braided pin ect.
For the bringhtness of 3mm Green through-hole LED, we have three level: common bright 3mm Green through-hole LED, super bright 3mm Green through-hole LED and ultra bright 3mm Green through-hole LED.
For the angle of 3mm Green through-hole LED, 15 degrees, 30 degrees, 45 degrees, 60 degrees, 120 degrees are available.
For the raw materials, we use the LED chip from Taiwan Epistar, Tyntek, Optotech. The stability of our products have been recognized by all of our custom.
All of our product are meet with Reach, CE, RoSH, SGS, EN62471 standards and have 5 years warranty.
3Mm Green Through-Hole Led,Green Through-Hole Led,3Mm Through-Hole Led Oval Green,Through-Hole Led Oval Green
Shenzhen Best LED Opto-electronic Co.,Ltd / BESTSMD CO LIMITED(HK) , https://www.bestsmd.com