The waterproof part of the bathroom is particularly important. Doing badly will have a great impact on the home life in the future. Therefore, we must pay attention to the details of the construction during the renovation. Let's talk about how to do waterproofing today.
First, level first
If it is a refurbished floor tile, then after the floor tile is cut, it is necessary to level the cement mortar again, and then make waterproof after leveling. The purpose of this is to avoid leakage of the waterproof coating due to uneven thickness.
Second, wall treatment
One of the most important aspects of waterproofing is the wall surface treatment. On the wall of a typical bathroom, a waterproof coating of about 30 cm in height is required to prevent water stagnating through the wall. However, if the bathroom wall is a non-load-bearing light wall, the entire wall should be painted with waterproof paint. If you use a two-seater shower screen, the two walls that are associated with it must also be covered. If a bathtub is used, the height of the waterproof material on the wall next to the bathtub is also higher than the upper edge of the bathtub.
Decoration waterproof bathroom waterproof
30% Graphite Cathode Carbon Block
30% Graphite Block,Low-Carbon Cathode Carbon Block,30% Graphite Cathode Carbon Block,High Quality Graphite Cathode Carbon Block
Taigu Tengfei Carbon Co., Ltd. , https://www.tftsgs.com