The villa is what we all want to have. When we choose to build our own villa, everyone pays attention to the effect. For those who don't understand the decoration, they only pay attention to the beautiful villa, but they don't know how to go to the construction. So everyone knows what to pay attention to when building roof tile construction? Today, Xiaobian will take a look at the villa roof tile construction method and construction precautions!
Villa roof tile construction method
1. Sloping roof of Dapo roof: screed construction → waterproof layer construction → insulation layer construction → protective layer construction → Xiwa paving → lightning protection belt installation, the construction process of the slant roof of the minaret roof is the same as the slope roof.
2. Large-scale roof inclined roof construction 5.1.1 Leveling screed is 20mm thick 1:3 cement mortar leveling layer. Before screeding, first clean the dust, mortar and other debris on the surface of the base.
3, the roof elevation is numerous, the yin and yang ridge lines are staggered, and there are more members on the roof.
4, the leveling layer should be yin and yang ridge line, tube root, smoke duct, chimney, tiger window, gutter, and other yin and yang corners with cement mortar smeared into a radius of not less than 60mm arc or obtuse angle, so that the waterproof roll is smooth .
Villa roof tile construction precautions
1. When laying roofing tiles, it is necessary to carry out a water splash test on the roof base to check whether there is water leakage before laying the roof tiles.
2. The order of the tiling of the roof and the sill should be from the bottom to the top, from left to right. In order to ensure the quality of the tiling, a diagonal line should be pulled from the ridge to the cornice, that is, the remaining line is aligned with the lower right corner of the first tile under the ridge, and the second tile of the second row and the third tile of the third row. Until the lower right corner of the mouth of the mouth, all in a straight line. Then, from the bottom to the top, the tiles are laid one by one, which can achieve a straight and neat appearance.
3. When laying inclined ridges and inclined trench tiles, the entire roof tile should be hung first. The inclined groove tiles should be covered with a flooding width of not less than 180mm. The ink line should be ejected, and the excess tile surface should be sawed with a cutting machine, and then pressed. The number order is hung up.
4. The joint between the ridge tile and the flat tile is preferably flat with a knife ash; the joint of the flat ridge should follow the wind direction; the joint of the ridge is downward, and the intersection of the flat ridge and the oblique ridge is to be used with a knives. The ash is tight.
5, the roof tile slope is ≥ 65 ° roof tile must be fixed per perforation during construction, so that the roof tile is laid firmly.
After learning from the contents of the article, we know that there are still many requirements for the construction of our villa roof tile, and Xiaobian also introduces some villa roof tile construction methods, which are simple and clear, you can refer to it, what do you want to know in the future? Decoration information, you can pay attention to our decoration home network.
More related wonderful reading:
Villa roof tile construction advantage villa roof tile construction method
Electric Impact Wrench,Electric Torque Wrench,Electric Ratchet Wrench,Electric Socket Wrench
Ningbo Hoya Electronic Commerce Co., LTD , https://www.jauhitools.com