ISG series single-stage single-suction pipeline centrifugal pumps are designed by Zhejiang Bede Pump Industry Co., Ltd. using IS-type centrifugal pump performance parameters and ingeniously combined on the basis of general vertical pumps, according to the use temperature, medium, etc. Different derived from the ISG type suitable for hot water, high temperature, corrosive chemical pumps, oil pumps. This series of products has the advantages of high efficiency, energy saving, low noise, reliable performance and so on.
1. The pump has a vertical structure with the same inlet and outlet diameters, and is located on the same center line. It can be installed in the pipeline like a valve. It has a compact and beautiful appearance, small footprint, and low construction investment. If a protective cover is added, it can be Use outdoors.
2. The impeller is directly installed on the extended shaft of the motor. The axial size is short and the structure is compact. The pump and the motor bearing are configured reasonably, which can effectively balance the radial and axial loads generated by the pump operation, thereby ensuring the smooth operation of the pump. The vibration noise is very low.
3. The shaft seal adopts a mechanical seal or a combination of mechanical seals, an imported titanium alloy sealing ring, a medium-sized high temperature resistant mechanical seal and a hard alloy material, and a wear-resistant seal, which can effectively increase the service life of the mechanical seal.
4. Convenient installation and maintenance, without dismantling the pipeline system, as long as the nut of the pump conjoined seat is removed, all the rotor components can be extracted.
5. The series and parallel operation modes of the pump can be adopted according to the requirements of use, ie flow and head.
6. The vertical and horizontal installation of the pump can be used according to the requirements of pipeline layout.
SG type vertical pipeline centrifugal pump is used to transport clean water and other liquids whose physical and chemical properties are similar to clean water. It is suitable for industrial and urban water supply and drainage, pressurized water delivery for high-rise buildings, garden sprinkler irrigation, fire pressurization, remote transportation, Through refrigeration cycle, bathroom and other cold and hot water circulation pressurization and equipment matching, use temperature T
use:
1. IRG (GRG) type vertical hot water (high temperature) circulation pump is widely used in: energy, metallurgy, chemical industry, textile, paper making, and hotels and restaurants boiler high temperature hot water pressurized circulation transmission and city heating system circulation pump, IRG type use temperature T
2. IHG type vertical pipeline chemical pump is used to transport liquids that do not contain solid particles, are corrosive, and have a viscosity similar to water. They are suitable for petroleum, chemical, metallurgy, power, paper, food, pharmaceutical and synthetic fiber sectors. It is -20 ℃ ~ 120 ℃.
3. YG type vertical pipeline oil pump is used to transport gasoline, kerosene, diesel and other petroleum products. The temperature of the transported medium is -20 ℃ ~ + 120 ℃.
Exposed Bathtub Faucets,Long Tube Bathtub Faucet,Modern Bathroom Tub Faucet,Three Function Bathtub Faucet
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com