Solid wood composite floor contrast-purchase-experience articles: Provide some simple and effective suggestions on how to correctly buy solid wood composite flooring for consumers to see, check and test the good luck floor, and make a brief introduction.
Three look
First, look at the thickness of the surface layer, the surface paint is painted with luster, the paint film is full and even, there are no needle-like bubbles, small white spots, with or without indentation, scratches, stains, and damage. The thickness of the surface of the solid wood composite floor determines its service life. The thicker the surface layer is, the longer the wear resistance is. The thickness of the imported high-quality solid wood composite floor is generally above 4 mm.
The second is to see if the surface material has obvious defects. Generally, there should be no decay, dead knots, knot holes, wormholes, resin capsules, cracks or cracks. The varieties of wood used in the core layer and the bottom layer should be consistent, otherwise the structure of the floor will be firm and stable.
The third is to see if there are any defects in the tongue and groove around the floor.
Three checks
First, check whether the specification dimensional tolerance of the product is consistent with the specification or product introduction, and it can be measured with a ruler or compared with different varieties;
The second is to check whether the splicing can be strictly flattened. By checking the multiple floors and assembling them by themselves, after the flattening, observe whether the groove combination is tight, how tight the combination is, whether the splicing surface is flat, you can touch it by hand, or you can pick up two pieces. The floor is shaken in the hand and checked for looseness;
The third is to check the code of the product of the selected grade. After picking up the product, check whether the code on the package matches, because the different code of the same product grade is different. It is necessary to find out the code to avoid shoddy.
Three trials
First, test its glue performance and waterproof and moisture resistance. The production of solid wood composite flooring is made by hot pressing of the adhesive coated surface, so the quality of the glue directly affects the use effect and life. Different brands of small samples can be immersed in water to test its water absorption and adhesion. The lower the immersion peeling speed, the better, and the stronger the viscosity, the better.
The second is to test the fire performance. Place the pyrotechnics on the surface to burn, if there are no traces, the fire protection coefficient is higher.
The third is to smell the formaldehyde content. According to national regulations, the formaldehyde content per 100 grams of floor should not exceed 9 mg. If you smell your nose with a pungent smell of formaldehyde, it means that the amount of formaldehyde released in the air will exceed the standard.
Ball Valve,Linear Expansion Valve,Thermal Exchange Valve,Tap Isolation Valve
LONG TERM ELEC. CO., LTD , https://www.longtermhvac.com