4 Conclusion
This paper introduces a set of network control system applied to CNC machine tools. Based on TCP/IP communication protocol, Socket (set word) is used to establish the server/client mode. The host with CNC system is used as the server, and the network control terminal is used as the network control terminal. Client computer. The network control and debugging of the CNC machine tool by the client can make the machine tool more flexible and controllable. The system can operate the machine tool in real time in different places, basically achieve the purpose of dynamic debugging and monitoring the operation of the machine tool, and provides an efficient way for machine tool control and debugging technology, which has certain practicability and value.
references
[1] Han Jiang and other 1 network CNC system concept and its technical content 1 China Mechanical Engineering, 2001 (10): 1141 ~ 11441
[2] Zhang Jie and other intelligent remote control and control system of CNC machining unit 1 China Mechanical Engineering, 1998 (12): 753 ~ 7561
[3] Zhou Qi et al. 1 Network-based CNC Manufacturing Technology 1 Electromechanical Engineering, 2002, 19(5): 57-611
[4] Jia Zhenyuan and other 1 remote control rapid prototyping processing technology research 1 Journal of Dalian University of Technology, 2001, 41 (4): 472 ~ 4761
[5] Wang Jianfeng et al. 1 Internet-based remote monitoring system 1 Manufacturing Informatization, 2002 (3): 7-91
[6] Shi Xuming et al. Application of PC-based open CNC system in Intranet 1 Combined machine tool and automated processing technology, 2001, 1:26～291
Previous page
NANSHAN Caliber Powder Loads of low velocity can be used for the powder actuated tools of
NANSHAN®, POWERS®, RAMSET®, HILTI®, SIMPSON® and BLUE POINT FASTENERS®.
HIGH QUALITY AND DEPENDABILITY
NANSHAN powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Available in color coded single shot, 10 shot strips and 10 shot discs.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by the national law. Failure to use properly can result in serious injury or death to users or bystanders.
Advantages Powder Guide
Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level increases.
Powder Loads,Powder Actuated Loads,Powder Loads For Actuated Fasteners,Powers Powder Loads
Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com