Motor bearing removal method

Source: China Bearing Network Time: 2017-12-19

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The bearing is usually used after 2000 hours of operation; however, it is used together; it is cleaned and refueled; so it is known through these methods; it summarizes the way to clear the point.
About the hot oil removal method because it has been used for a long time; soft dry oil or anti-rust cream hardened bearings; should be immersed in 100 200 Â° C hot oil; clamp the bearing with pliers; use a brush to clean the oil on the bearing. Soft The dry oil or anti-rust paste is melted when heated to 100 200 Â° C; it is simply washed out of the gap of the bearing. Sometimes the bearing is shaken repeatedly in the oil. The oil will also flow away from the gap.
In fact, the bearing is in the time of clearing the centripetal surface of the motor or the imported motor; the ball, the bead frame and the inner ring should be laterally turned out from the outer ring and then immersed in the hot oil; the short cylindrical roller bearing should also be removed. Disengage the roller, bead frame, inner ring and outer ring. When the hot oil is removed; the temperature of the oil should not exceed 20 Â° C. If it is heated directly with an open flame; care should be taken to avoid burning the oil; the bearing should be hung in the In the oil pan, sinking the bottom will cause overheating and reduce the hardness.
The bearing is in the process of cleaning up; there is a better understanding of this method; and from some simple methods, we can correctly know what should be done in this aspect; how to do it, etc. do better.

Recommend to friends comments close window

Bearing related knowledge

FAG company's bearing makes up for the replacement of the FAG bearing. The correct device operation is the key to the long life of the bearing. Guessing and avoiding the discussion: Roller bearing cage and heat treatment

This article links to http://
Please indicate the bearing network http://

Previous:The use of plastic in rolling bearings (2)
Next: Analysis of the energy loss and application of motorcycle initiators

Zirconia Ceramic Tube

The composite pipe has fully exerted the high strength, toughness, impact resistance, good welding performance and high hardness, high wear resistance, corrosion resistance and heat resistance of the steel tube, which overcomes the low hardness, poor wear resistance and poor toughness of the steel tube. specialty. Ceramic tubes are widely used in the following industries:
First, the mine:
1. Coal water slurry, coal washing mud, mine filling and coal powder in coal industry;
2. Metal mines: pipeline transportation of concentrates and tailings.
Second, metallurgy:
1. Pipes for coal injection and slag transfer in blast furnaces of iron and steel plants;
2. Pipes for transportation of iron alloys, refining, and optimization of steelmaking.
3. Cement Plant: Raw slurry transportation, pulverized coal transportation, hoist cutting, concrete conveying pipeline of rotary kiln wet production line.
Fourth, coal-fired power plants in addition to ash, slag, powder feeding, powder return, desulfurization of lime gypsum slurry transport.

Zirconia Ceramic Tube,Zirconia Ceramic Rods,Ceramic Bushing,Ceramic Tubes

Dongguan Haikun New Material Co., Ltd. , https://www.hkceram.com