Recently, in order to increase production efficiency and reduce the labor intensity of employees, Qinghai Jinyi Aluminum Co., Ltd., based on the needs of production, started from the clamp bar process in the extrusion workshop, carried out technical research, and developed aluminum stick slides.
Prior to this, the clamping bar work of each machine in the extrusion workshop had been relying on manual operation. The aluminum rod was clamped from the cutting bar to the loading rack with a long pliers, which was time-consuming and labor-intensive, and the operation was also increased. Personnel risk factor. To this end, Zhu Qinghan, the organization engineer of the production department, and Yang Zhong, the minister of energy and power, and related technical personnel have made key research and succeeded in producing aluminum rod slides.
According to Zhu Qinghan, an engineer, this slideway is designed based on the distance between the shearing part of the hot shearer and the rack on the machine. The distance of each machine is different, ranging from 1700mm, 1800mm, 2100mm, 2300mm, and 2400mm. The distance, so drawing drawings and parts processing work is also more tedious. The chute is composed of rollers, gaskets, pulleys, fixing screws, channel steel and center shaft.
After the slide was put into use, it not only bid farewell to the history of manual clamp operation, but also achieved remarkable effects of simple operation, strong practicality, saving time, and improving production efficiency. In the original manual operation, 4-6 tons of rods were clamped per machine per day, which has now been increased to 6-10 tons. This completely eliminates the safety accidents that occur when the clamping rods are manually operated. At the same time, it saves the company the cost of purchasing equipment. The earth eased the labor intensity of employees.
Prior to this, the clamping bar work of each machine in the extrusion workshop had been relying on manual operation. The aluminum rod was clamped from the cutting bar to the loading rack with a long pliers, which was time-consuming and labor-intensive, and the operation was also increased. Personnel risk factor. To this end, Zhu Qinghan, the organization engineer of the production department, and Yang Zhong, the minister of energy and power, and related technical personnel have made key research and succeeded in producing aluminum rod slides.
According to Zhu Qinghan, an engineer, this slideway is designed based on the distance between the shearing part of the hot shearer and the rack on the machine. The distance of each machine is different, ranging from 1700mm, 1800mm, 2100mm, 2300mm, and 2400mm. The distance, so drawing drawings and parts processing work is also more tedious. The chute is composed of rollers, gaskets, pulleys, fixing screws, channel steel and center shaft.
After the slide was put into use, it not only bid farewell to the history of manual clamp operation, but also achieved remarkable effects of simple operation, strong practicality, saving time, and improving production efficiency. In the original manual operation, 4-6 tons of rods were clamped per machine per day, which has now been increased to 6-10 tons. This completely eliminates the safety accidents that occur when the clamping rods are manually operated. At the same time, it saves the company the cost of purchasing equipment. The earth eased the labor intensity of employees.
Fiber Glass Tape Measure,Rubber Tape Measure,Steel Tape Measure,Mini Retractable Tape Measure
Yucheng County Ruiertuo Tools Co., Ltd. , https://www.ruiertuotools.com