*****Feed Technology Development Co., Ltd.
Quality management system
Third level file
Feed production process parameter standard
File No: Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Edition:
Pseudo   system:                   time:
Edit   write:                   time:
Review   nuclear:                   time:
Batch   quasi:                   time:
Distribute Number:
page number:
Controlled state:
year   month   Released
year   month   Day implementation
*****Feed Control Technology Co., Ltd. Quality Control Department
release
one,
Crushing process
Raw material category | Sieve aperture | |||
General pellets | Fish material | Layer chicken | Pig concentrate | |
Valley real | 2.0-2.5mm | Less than 1.5mm | 4.0-4.5mm | 2.0-3.0 |
Biscuits | 2.0-2.5mm | Less than 1.5mm | 4.0-4.5mm | 2.5-3.0 |
Mixing time and mixing uniformity
Equipment type | Mixing time (seconds) | Mixing uniformity ≤, % |
Biaxial paddle mixer | 1. 100 seconds (no fuel) 2 . 100 seconds (fueling amount ≤ 10 kg / batch 3 . 120 seconds ( refueling amount > 10 kg / batch ) | 5 |
Vitamin premix feed | 40 minutes | 5 |
Mineral premix | 10 minutes | 5 |
Granulation process
Variety model | Steam pressure ( Mpa ) | Tempering material temperature °C |
Livestock and poultry | 0.3-0.6 | 75-90 |
Fish material | 0.5-0.8 | 85-98 |
A,
φ ≤ 2.0mm length is 2.5-3.5 times the diameter
B,
2.0mm <φ≤ 3.0mm length is 2-3 times the diameter
C,
3.0mm <φ length is 1.5-2.5 times the diameter
Five, sewing process
A,
The seam should be straight and there should be no jumpers. The line is 3-4 cm from the mouth of the bag and the length of the seam is less than 5 cm.
B,
The label is placed on the left side of the bag, 5 cm from the mouth of the bag , and the upper side is aligned with the mouth of the bag.
C,
The name of the material, the woven bag and the label are the same.
Sixth, ring mold specifications, particle size and grading sieve
model Production variety | Ring mode aperture / Length to diameter ratio | Ring mode control requirements | Is it broken? | Upper screen | Lower sieve |
Suckling pig broken material | 4.5/9.0-10.0 | Turn to large pig material when worn to φ5.0 | Yes | 6 | 10 |
Chicken material | 4.5/9.0-10.0 | Turn to large pig material when worn to φ5.0 | Yes | 8 | 10 |
Suckling pig Piglet feed | ( 2.3-2.8 ) 3.5/9.0-10.0 | When it is worn to φ3.5/4.0, it will be transferred to the pig/big pig material. | no | 2 | 10 |
Medium and large pig feed | 4.5/9.0-10.0 | Should be deactivated or used as special materials when worn to φ5.5 | no | 2 | 8 |
Egg duck | 3.5/11.0-12.0 | Turn to large pig material when worn to φ4.5 or deactivate | no | 2 | 8 |
Zhongda chicken Zhongda duck | 2.8/11.0-12.0 | Switch to large pig material when worn to φ3.5 or use | no | 2 | 10 |
Ducklings | 2.0/12.0 | Turn to large pig material when worn to φ2.8 | no | 2 | 10 |
Small fish | 1.8/15.0 | When it is worn to φ2.3, it is transferred to medium-term fish. | no | 2 | 10 |
Medium fish
| 2.8/14.0 | Turn to large fish when worn to φ3.3 | no | 2 | 10 |
Adult fish
| 3.5-4.5/14.0 | Should be deactivated or used for wear to φ5.0 | no | 2 | 8 |
Seven, measuring instrument tolerance range
post | Weighing range | Allowable error | Total deviation |
In the control | 1 ton
| ± 0.3% | ≥ 0 |
Micro chamber | 300-500g 500-1000g 1-15kg 15-40kg 40-80kg | ± 5g ± 10g ± 0.1kg ± 0.2kg ± 0.25kg | ≥ 0 |
Manual feeding | 1- 10-20kg 20-40kg 40-60kg | ± 0.1kg ± 0.15kg ± 0.20kg ± 0.25kg | ≥ 0 |
Liquid addition | 1-30kg | ± 1% | ≥ 0 |
Bale | 5kg 20kg 40kg | ± 0.05kg ± 0.1kg ± 0.2kg | ≥ 0 |
Weighbridge (finished product) | 1- 11-20 tons 21-30 tons | ± 20kg ± 40kg ± 60kg |
|
Weighbridge (raw material) | 1- 11-20 tons 21-30 tons | ± 10kg ± 20kg ± 30kg |
|
thermometer | 1-50 degrees | ± 2 °C |
|
[ This post was last edited by qingfeng77121 at 2007-11-27 15:51 ]
White Melamine Faced Chipboard,Melamine Laminated Chipboard,High Glossy Melamine Chipboard
Film Faced Plywood,Bedroom Furniture,Cabinet Door Co., Ltd. , http://www.nsplywoods.com