In order to help customers who use floor decoration protective coatings to correctly select the type of flooring and effectively control the construction cost, it is recommended that customers start with the following factors:
First, mechanical performance requirements
The main three aspects are as follows:
1. Abrasion resistance: Which vehicles will be used when the floor is in use;
2. Pressure resistance: how much load the floor will bear when it is used;
3. Impact resistance: Whether the impact force will cause the floor surface to peel off;
Second, chemical performance requirements
The main considerations are as follows:
1. Acid and alkali resistance: The type and concentration of corrosive chemicals used.
2. Solvent resistance: solvent type and contact time when used.
Third, the floor position status
According to the location of the floor on the underground floor or the ground floor, do you need to prevent moisture or choose a special moisture-proof floor?
Fourth, the base surface condition
1. Base strength: general requirements compressive strength ≥ 20Mpa
2. Flatness: Do you need to repair with epoxy mortar?
3. Self-leveling is generally required before ground construction
Five, aesthetic requirements
1. Color requirements: Do you need a color division area?
2. Brightness requirements: Is it matt or bright?
3. Flatness requirements: Is there a requirement for the flatness of the floor?
Sixth, security requirements
If the floor is in a greasy environment or on a ramp, you need to choose a non-slip floor; if you are in a special place such as a gas station or oil depot, you need to choose anti-static and explosion-proof.
Cup Mask,Cup Face Mask,Cup Kn95 Mask With Valve,Kn95 Approved Cup Face Mask
Ningbo Autrends Prevention Products Co., Ltd , https://www.autrendsafety.com