Fluorescent lamps are divided into traditional fluorescent lamps and non-polar fluorescent lamps . Traditional fluorescent lamps, namely low-pressure mercury lamps, use low-pressure mercury vapor to radiate ultraviolet rays during discharge, so that the fluorescent powder emits visible light. Therefore, it is a low-pressure arc discharge light source. The explosion-proof discharge lamp that mainly excites the phosphor and emits light by the ultraviolet radiation generated by the discharge is called an explosion-proof fluorescent lamp.
Scope of application
Mainly used for petrochemical and other explosive and flammable places, the installation can be hanging and hanging.
1. Applicable to explosive zone 1 and zone 2 locations;
2. Applicable to the explosive atmosphere of IIA, IIB, and IIC;
3, for explosive dust environment 20 area, 21 area, 22 area places.
Performance characteristics
1, with T8LED lamp, light source energy efficient, than the T8 fluorescent lamp energy saving more than 50%.
2. The shell is made of lightweight aluminum alloy die-casting and the surface is treated with high pressure electrostatic spray.
3, through a unique light distribution design, precise control of the LED light source light and light angle, to avoid light pollution and the use of invalid light; soft light, no glare, will not cause operator fatigue, improve work efficiency.
4. There are wiring chambers inside the lamps and there are special wiring terminals. The user can directly enter the line during installation, and no additional connection box is required for easy installation. When replacing the lamp, simply replace the end cap and replace the lamp directly.
5, according to customer requirements matching international famous brand T5 fluorescent tubes, high luminous efficiency, more in line with the actual lighting environment, compared with T8 fluorescent tubes save about 30%.
6, can be equipped with emergency equipment according to user requirements, built-in light body light weight, when the outside world power, the light automatically switches the emergency lighting state.
Scope of application
Mainly used for petrochemical and other explosive and flammable places, the installation can be hanging and hanging.
1. Applicable to explosive zone 1 and zone 2 locations;
2. Applicable to the explosive atmosphere of IIA, IIB, and IIC;
3, for explosive dust environment 20 area, 21 area, 22 area places.
Performance characteristics
1, with T8LED lamp, light source energy efficient, than the T8 fluorescent lamp energy saving more than 50%.
2. The shell is made of lightweight aluminum alloy die-casting and the surface is treated with high pressure electrostatic spray.
3, through a unique light distribution design, precise control of the LED light source light and light angle, to avoid light pollution and the use of invalid light; soft light, no glare, will not cause operator fatigue, improve work efficiency.
4. There are wiring chambers inside the lamps and there are special wiring terminals. The user can directly enter the line during installation, and no additional connection box is required for easy installation. When replacing the lamp, simply replace the end cap and replace the lamp directly.
5, according to customer requirements matching international famous brand T5 fluorescent tubes, high luminous efficiency, more in line with the actual lighting environment, compared with T8 fluorescent tubes save about 30%.
6, can be equipped with emergency equipment according to user requirements, built-in light body light weight, when the outside world power, the light automatically switches the emergency lighting state.
Vinyl Floor,Flooring Wood,Pvc Flooring Plank,Wood Pvc Flooring
DONGYANG MAOSHENG PLASTIC CO.,LTD , https://www.maoshengflooring.com