Every homeowner will have a mirror in their homes, but it is worth noting that owners cannot buy mirrors and put mirrors casually. It is likely that they will violate the feng shui taboos, which will have a bad influence on the owners. Mirrors are very selective in their choice and placement, and must meet the requirements of Feng Shui.
In the feng shui of decoration, mirrors are used to "double the energy in the home", but the premise is that the owner must choose the shape and size of the mirror and set the position of the mirror. What kind of mirror shape, size, and what kind of placement position meets the Feng Shui requirements?
Zhong Tao Sanitary Ware   Silver Crystal Bathroom Cabinet  Carrie bathroom
First, the shape of the mirror
The mirror in the home is best chosen in the shape of a circle or an ellipse. The circle in the decoration of feng shui symbolizes a happy reunion, which can bring good luck to the occupants; if the decoration owner does not like round and oval mirrors, you can choose the square Mirrors, but because the square mirrors have angular edges and blemishes, the owners who choose the square mirrors must frame outside the mirrors so as not to cause helium to rush outwards, which will cause bad influence to the occupants.
Second, the size of the mirror
The size of the mirror is suitable to be able to see the entire head. The mirror that is too small is only suitable to be worn on the body and is not suitable for installation in the home.
Third, the mirror placement
1. It is best not to put a mirror in the living room. The living room is in the position of the nave of the entire house. Go through the place when you enter the house. If a mirror is placed in the living room, reflections will always appear when people enter or leave the house. .
2. The position of the mirror in the bedroom is the most stressful. It must not be placed directly opposite the bed. The occupants are vulnerable when they get up at night. At the same time, they should pay attention to the mirror in the dressing table. It is better to pull up the curtain when not in use. , This will help improve marital relations.
3. The bathroom is the best place to put a mirror. The mirror is preferably a large-sized mirror. This can reflect the dirty gas in the bathroom and create a good environment for the occupants.
Links: Kitchen Fengshui: Kitchen Qiao decoration wealth is nothing
Home feng shui learning large bedroom wardrobe display with exquisite
Home Feng Shui Renovation Company Entrance Decoration Feng Shui Bathroom House Home Furnishing Decoration Bedroom Wardrobe Decoration Living Room Living Room Decoration Feng Shui Living Room Feng Shui Taboo Home Feng Shui Decoration Feng Shui House Feng Shui House Decoration Feng Shui Taboo Kitchen Door Bathroom Feng Shui Taboo Bathroom Door Size Bathroom Size Bathroom Door Bathroom Feng Shui Small Bedroom Bedroom Feng Shui Taboo Home Furnishing
Plate rolling is a process of continuous three-point bending of sheet metal using a plate rolling machine. The equipment puts the sheet material between the upper and lower work rolls when rolling. The upper roller is raised and lowered vertically, and the two lower rollers rotate and move horizontally relative to the axis of the upper roller. When the upper roll descends, the plate is plastically deformed and bent between the upper and lower work rolls. The continuous rotation of the bottom roller drives the steel plate to advance and retreat through the friction between the plate and the roller to complete the coiling.
1. Pre-bending. When the plate is rolled, there is a length at both ends of the plate that does not bend because it does not touch the upper roller. It is called the remaining straight edge. In the process, the minimum force arm at which the plate starts to bend is called the theoretical remaining straight edge. The bending form (symmetrical bending, asymmetrical bending) is related.
2. Centering. The purpose of centering is to make the generatrix of the workpiece parallel to the roller axis to prevent skew.
3. Roll round. Rolling is the main process of product forming, which is divided into two types: one-time feed and multiple feeds. Multiple feeds are commonly used for rolling thick plates. The number of feeds depends on the technological constraints (such as the maximum allowable deformation during cold rolling) and equipment constraints (such as non-slip conditions and power conditions). When the rebound of the cold coil is significant, a certain amount of overcoiling must be added.
4. Straightening round. The purpose of rounding is to make the curvature of the entire circle as uniform as possible to ensure product quality. The general rounding process is divided into three steps:
(1) Load: According to experience or calculation, adjust the work roll to the position of the required maximum correction curvature.
(2) Rounding: Roll the roller 1 to 2 turns under the corrected curvature to make the entire curling rate uniform.
(3) Unloading: gradually unload the load, so that the workpiece is rolled several times under the gradually reduced correction load.
Rolling Machine,Three-Roller Bending Machine,Four-Roller Bending Machine,Roll Forming Machine
Rugao Yaou Import & Export Trade Co., Ltd , https://www.ntyaoumachinery.com