Briefly introduce the commissioning and function setting of the hot water circulation pump of the special hot water circulating pump. The general agent of Chongqing Shikang Intelligent Technology Co., Ltd. is a hot hot water circulation pump | hot water circulation system | Wilo circulation pump | floor heating circulating pump | Circulating pump | return water | booster pump.
Pay attention to WeChat public number: Chongqing Jiakang Intelligent Technology. WeChat consultation.
There are three main modes of operation for the special hot water circulation pump: single cycle, timed cycle, and 24-hour cycle.
First, a single cycle:
1. When the hot water circulation pump is turned off, open the hot water tap at the farthest end of the water heater, start the water heater work, and observe the time required for the hot water to flow out.
2. Turn on the hot water circulation pump switch and press and hold the “Mode button†for 3 seconds to enter the setting interface.
3. Set “Beijing Time†and “Set Temperature†according to the prompts, and set “Extended Time†according to the hot water outflow time recorded previously (system default 2 minutes).
4. After setting, press “ok†to save and exit.
5. The next time you use the single cycle function, the direct remote control board will start by pressing the “extension switch†(red button).
Second, the timing loop:
1. In the standby mode of the hot water circulation pump, press and hold the “Mode†button for 3 seconds to enter the setting interface.
2. Set “Beijing Time†and press “Mode†to enter the next step.
3. Set “Working Time†and “Starting Time†according to user requirements.
4. Press “ok†to save and exit.
5. When using the timed loop function next time, press the “temperature control†button on the body, and press the temperature control to cancel the timed loop.
Third, 24-hour constant temperature cycle (requires a return pipe):
1209, 180w and other models need to press the "temperature control" button on the machine to start the 24-hour constant temperature, 1212, 1232 models can directly press the "constant temperature" button on the remote control panel to use the constant temperature function. After the 24-hour constant temperature start, the water heater will start frequently depending on the temperature change of the water. It is relatively expensive, electricity and other resources. Large units such as villas and bungalows are recommended. Other types are recommended to avoid unnecessary waste.
Some models operate slightly differently. Please call the after-sales inquiry for related operations.
Chongqing Jiakang Intelligent Technology Co., Ltd. Address: No.1716, Meige, International Exhibition Plaza, Nanping, Nanping District, Chongqing
Http://news.chinawj.com.cn
JINAN LODOR CNC EQUIPMENT CO.,LTD , https://www.zgfireplace.com